Probes Key; Alarm Key - Lochinvar AMICUS HT Series Installation, Commissioning And Service Manual

6.4 PROBES key

To view all the parameters measured by the sensors of the unit press PROBES;
By pressing the T5 key, all relevant values of the circuit will be displayed
PROBES
Probes visualization Probes visualization
Evaporator inlet temperature
Evaporator outlet temperature
Condenser press./temp.circ.1
Combined def. temp.circ.1
SET
ALARM
SERVICE T1
T2
T3
T4
CIRC
EXIT
Press to go back to the main menu.

6.5 ALARM key

When the alarm occurs, the display shows the icon
Press ALARM key to read the alarm status:
Unit ON: Heating Unit ON: Heating
Evaporator inlet temperature
Evaporator outlet temperature
External air temp. (FC)
San. water temperature
PROBES SET
T1
T2
T3
T4
Stand-by Stand-by
Evaporator inlet temperature
Evaporator outlet temperature
External air temp. (FC)
San. water temperature
PROBES
T1
T2
T3
28.0 °C
°C
26.6
bar
18.8
31.2 °C
ALARM EXIT
T8
T7
T6
T5
blinking.
00:00 01/01/2014
30.0 °C
35.0 °C
°C
5.0
50.0 °C
ALARM SERVICE CIRC.
T8
T7
T6
T5
00:00 01/01/2014
30.0 °C
35.0 °C
°C
5.0
50.0 °C
SET ALARM SERVICE CIRC.
T8
T7
T6
T4
T5
Probes visualization Probes visualization
San. water temperature
San. water secur. temper.
External air temperature
T1
T2
Alarms Alarms
b1HP b1HP
High pressure circuit 1 (pressostat)
T1
T2
46
27.0 °C
°C
49.7
°C
23.3
ALARM EXIT
T7
T3 T6
T4 T5
Attivo Active Aktiv
RST ALL RESET
T7
T3 T6
T4
T5
Rev. A 11-2020
T8
EXIT
T8