Table of Contents
Advertisement
4.4 Inspection
When installing or servicing the unit, it is necessary to strictly follow the rules reported on this manual, to conform to all the specifications
of the labels on the unit, and to take any possible precautions of the case. Not observing the rules reported on this manual can create
dangerous situations. After receiving the unit, immediately check its integrity. The unit left the factory in perfect conditions; any eventual
damage must be questioned to the carrier and recorded on the Delivery Note before it is signed. Lochinvar must be informed within 24
hours of delivery of any damage along with pictures so this damage can be assessed.
Before accepting the unit check:
• The unit did not suffer any damage during transport;
• The delivered goods are conforming to what shown in the delivery note.
In Case of Damage
• List the damage on the delivery note
• Inform the Company of the extent of the damage within 24 hours. After this time any claim will not be considered.
• A full written report is required for cases of severe damage.
4.5 Storage
Units should be stored under cover and ideally, should remain in their packaging. The tools that are supplied for opening the electrics box
should be formally transferred to the person responsible for the plant.
4.5.1 Shipment
The shipment must be carried out by authorised carriers and the characteristics of the vehicle used must be such as to avoid damaging the
machinery transported/to be transported, neither during loading and unloading nor during transport. If the roads to be driven are irregular,
the vehicle must be fitted with special suspensions or internal walls in order not to damage the unit during the shipment.
The maximum ambient temperature for storage/shipment is +45°C and the minimum is -20°C,
4.6 Unpacking
Packaging could be dangerous for the operators.
It is advisable to leave packaged units during handling and remove it before the installation.
The packaging must be removed carefully to prevent any possible damage to the machine.
The materials constituting the packaging may be different in nature (wood, cardboard, nylon, etc.).
The packaging materials should be seperated and sent for disposal or possible recycling to specialist waste
companies.
21
Rev. A 11-2020
Advertisement
Table of Contents
