Table of Contents
Advertisement
4.3.12 Change selections after program launch
Adding clothes after launching the program:
If the water level in the machine is appropriate when you press the Start/Pause
button,the door lock deactivates and the door opens to allow you to add
laundry. The door lock icon on the screen turns off when the door lock is
deactivated. After adding laundry, close the door and press the button again
Departure pauseto resume the wash cycle.
If the water level in the machine is inadequate when you press the Start/Pause
button, the door lock cannot be deactivated and its icon remains active on the
screen.
VS
If the water temperature inside the machine is higher than 50°C, you cannot
disable the door lock for safety reasons, even if the water level is appropriate.
Switch the machine to pause mode:
Press the Start/Pause buttonto put the machine in pause mode. The Pause
symbol flashes on the screen.
Change program selections after program launch: Program modification is
allowed when the current program is running unless the Child Lock is
activated. This action will cancel the current program.
VS
The selected program starts again.
Change auxiliary function, speed and temperature
Depending on the phase reached by the program, you can cancel or activate the
auxiliary functions. See "Selection of auxiliary functions"
You can also change the speed and temperature settings. See the points
"Speed selection" and "Temperature selection".
31 / EN
Washing machine / User manual
Advertisement
Table of Contents
