Connecting The Exhaust Duct - Beko WTV8716XBWST User Manual

Table of Contents

Advertisement

4.1.5 Connecting the exhaust duct

• Attach the end of the drain hose directly to the waste pipe, toilet or
bathtub.
AT
CAUTION :
In addition, there is a risk of burns due to high washing temperatures! In order to prevent
such situations and to ensure that the machine operates the water inlets and drains without
problems, firmly fix the drain hose.
• To prevent waste water from re-entering the machine and to ensure easy
drainage, avoid immersing the end of the hose in waste water or inserting it
into the drain line more than 15 cm. If the hose is too long, cut it.
• The end of the hose must not be bent, stepped on or bent between the pipe and the
machine.
• If the length of the pipe is very short, you can add an original extension pipe to
it. The length of the pipe cannot be more than 3.2 m. To avoid any malfunction
caused by a possible water leak, the connection between the extension pipe and
the drain pipe of the product must be well inserted using a suitable flange, to
prevent any exit and any leakage.
4.1.6 Adjusting the feet
AT
CAUTION :
must be level and balanced on its feet. Balance the machine by adjusting the feet.
Otherwise, the machine may move and cause a number of problems, including
vibration.
CAUTION :
damage them.
10 / EN
1
Tighten the pipe nuts by hand. Never use a tool
to tighten these nuts.
2
After the pipe connection is complete,
check for leaks at the connection points by
fully opening the taps. If you find any leaks,
close the valve and remove the nut. Tighten
the nut carefully after checking the seal. To
prevent water leaks and resulting damage,
keep taps closed when not using the
product.
Your home will flood if the drain hose comes out of its housing while draining.
To ensure that your device operates quieter and without vibration, it
Do not use any tools to unscrew the lock nuts. Otherwise, you can
• Connect the drain hose to a minimum
height of 40 cm and a maximum height of
100 cm.
• If the drain hose is lifted after it has been laid
at or near floor level (less than 40 cm above
the floor), water drainage becomes more
difficult and laundry may become considerably
wet. This is why the heights described in the
diagram must be respected.
Washing machine / User manual

Advertisement

Table of Contents
loading

Table of Contents