Toro ProCore 648s Operator's Manual page 37

Figure 65
5. On the Press OK to Start Teach screen
66), press the right InfoCenter button.
Figure 66
Note:
The C
ALIBRATION
displays (Figure 67), and the coring head slowly
lowers.
Important:
Keep your hand near the
InfoCenter.
Note:
The coring head lowers slower if the
hydraulic fluid is cold.
Figure 67
g343379
(Figure
g343378
E message
NGAGED
g343376
6. When any tine touches the ground, press the
right InfoCenter button on the Lowering Head
screen (Figure
Note:
Tines should only touch the ground, and
not lift or unload the weight from the tires.
If the coring head lifts the machine, the machine
incorrectly calibrates the ground height, resulting
in inaccurate hole depth and entry tufting of the
aeration hole.
Note:
the C
ALIBRATION
displays (Figure
7. Press the left InfoCenter button to exit the Teach
Ground Height application
37
68).
Figure 68
C message
OMPLETE
69), and the head fully raises.
Figure 69
(Figure 70).
g343377
g343375