Lowrance LVR-250 Installation And Operation Instructions Manual page 16

This simulation shows the locations of all the following information symbols:
Symbol Meaning
TX Transmitting.
HI LO Transmission power. High (HI) 25W or Low (LO) 1W.
WX Weather channel. LVR-250 US only.
WX ALT Weather Alert. Alarm beeps will sound. LVR-250 US only.
BUSY Receiver busy with an incoming signal.
PRI Priority channel is selected.
D Duplex operation. Otherwise, blank for Simplex operation.
LOCAL Local calling is selected. Otherwise, blank for distance calling.
DSC DSC capability is available.
Incoming DSC call.
Low Battery warning (activates at 10.5 V).
Channel selected.
USA INT CAN Selected channel bank for VHF radio operations and regulations.
X Channel is temporarily deleted from the ALL SCAN operation.
B A Channel suffix, if applicable.
CH1 CH2 CH3 Shows which of the 3 favourite channels, if any, are selected.
Otherwise blank.
ATIS LVR-250 EU only, and enabled for radios in European inland waterways.
A typical operational display is shown here.
The latitude and longitude of the vessel and the local time are shown.
A transmission on Channel 16 is being made at high power using the International channel
bank.
Channel 16 is set as the Priority channel. It is also set as favourite channel 1.
There is an incoming DSC call so the receiver is busy.
16 Lowrance - LVR-250 Installation and Operation Instructions