Request The Ll Position Of A Buddy (Ll Request) - Lowrance LVR-250 Installation And Operation Instructions Manual

3. Again press, ENT, then select RELAY.
4. Press ENT, the arrow is printing <INDIV RELAY>.
5. Press ENT, the INDIV RELAY menu appears, which displays the buddy entries you have
saved and <MANUAL NEW> for manual number entry.
6. Set the channel and continue as explained in Section 5-2-1.
5-2-9-2 Call distress relay to all ship using the Distress Log
To make a distress relay to all ship in the log.
DSC CALL
ALL SHIPS
CALL LOG
>DIST LOG
SAM
>CALL BACK
DELETE
RELAY
1. Press CALL to enter DSC mode, then select DIST LOG.
2. Select the entry that you want to call and press ENT. The details are displayed over two
screens that alternate every 1.5 seconds.
3. Again press, ENT, then select RELAY. Then select ALL RELAY.
4. Press ENT, two alternating screens are displaying, and again press ENT to send out the
call.

5-2-10 Request the LL Position of a Buddy (LL REQUEST)

DSC CALL
CALL LOG
DIST LOG
>LL REQUEST
SAM
LL REQUEST
AWAITING ACK
3. The working channel name is displayed while the radio waits for an acknowledgement
from your buddy. If there is no reply after 1 minute the radio asks if you want to retry.
Continue as explained in Section 5-2-2.
40
02 SAM
DISTRESS
FLOODING
RELAY
>INDIV RELAY
ALL RELAY
LL REQUEST
>SAM
TOM
BUDDY #3
1. Press CALL to enter DSC mode, then select LL REQUEST.
2. Select the buddy whose LL position you want to request then
press ENT to send the request. (See Section 5-3-5 for the
acknowledgement.)
Lowrance - LVR-250 Installation and Operation Instructions
Alternating
600000201
IN DISTRESS
RELAY TO:
ALL
SAM
LL REQUEST
>SEND?
DISTRESS
12:05 UTC
82º50.003 N
27º45.543 W
600000201
IN DISTRESS
Alternating
RELAY
>SEND?
SAM
LL REQUEST
CALLING...