Section 3 - Radio Setup Menu (Radio Setup); Radio Setup Menu (Radio Setup); Channel (Uic) - Lowrance LVR-250 Installation And Operation Instructions Manual

Section 3 - Radio Setup Menu (RADIO SETUP)

3-1 Radio Setup Menu (RADIO SETUP)

The following options are available through MENU key:
UIC
CH NAME
RING VOLUME
KEY BEEP
INT SPEAKER
WATCH MODE
WX ALERT
COM PORT
Sections 1-3 and 1-4 explain how to navigate around the menu and enter, save and change
data.

3-2 Channel (UIC)

Toggle between USA, International or Canadian channel banks. The selected channel bank is
displayed on the LCD along with the last used channel. All the channel charts are shown in
Appendix C.
RADIO SETUP
>UIC
CH NAME
RING VOLUME
Channel band.
See Section 3-2.
Edit or delete channel names.
See Section 3-3.
Set the volume level of the incoming call notification beeps.
See section 3-4.
Set the volume level of the beeps.
See section 3-4.
Switch ON/OFF (on/off ) the radio's internal speakers.
See section 3-5.
Selects the operation of Dual or Tri watch scanning.
See section 3-6.
Selects if the WX Alert scanning mode is ON (on) or OFF (off ).
LVR-250 US only. See section 3-7.
Select NMEA protocol for communications between the VHF radio
and any other instruments. See section 3-8.
UIC
>USA
INT'L
CANADA
Lowrance - LVR-250 Installation and Operation Instructions 27