1. Manuals
  2. Brands
  3. Lowrance Manuals
  4. Radio
  5. LVR-880 US
  6. Operation instructions manual

Lowrance LVR-880 US Operation Instructions Manual

Hide thumbs Also See for LVR-880 US:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Instruction and Installation Manual
Pub. 988-0158-061
www.lowrance.com
LVR-880 US
LVR-880 EU
VHF Radio
Operation Instructions

Advertisement

Table of Contents
loading

Related Manuals for Lowrance LVR-880 US

Summary of Contents for Lowrance LVR-880 US

  • Page 1 Pub. 988-0158-061 www.lowrance.com LVR-880 US LVR-880 EU VHF Radio Operation Instructions...

  • Page 2: Important Safety Information

    Any unauthorized commercial distribution of this manual is strictly prohibited. Lowrance Electronics may find it necessary to change or end our policies, regulations, and special offers at any time. We reserve the right to do so without notice. All features and specifications subject to change without notice. All screens in this manual are simulated.

  • Page 3: Table Of Contents

    2-18 SCAN (ALL SCAN & 3CH SCAN) ....................16 2-19 SCAN (DUAL WATCH Mode) ...................... 17 2-20 SCAN (TRI WATCH Mode) ......................17 2-21 WX ..............................17 2-22 CALL MENU ............................ 18 2-23 PTT ..............................18 2-24 H/L ..............................18 Lowrance - LVR-880 Operation Instructions...
  • Page 4 4-3 Ring Volume (RING VOLUME) ..................... 34 4-4 Key Beep Volume (KEY BEEP) ..................... 34 4-5 Select Units (UNITS) ........................34 4-6 Internal Speaker Connections (INT SPEAKER) ............... 34 4-7 Set the Priority Channel (WATCH MODE) ................35 Lowrance - LVR-880 Operation Instructions...
  • Page 5 6-12 Send an ALL SHIPS Distress Relay Using the Distress Log (DIST LOG) ....... 52 6-13 Request the LL Position of a Buddy (LL REQUEST) ............52 6-14 Track a Buddy (TRACK BUDDY) ....................53 6-14-1 Start or Stop Tracking a Buddy (START TRACK) ................53 Lowrance - LVR-880 Operation Instructions...
  • Page 6 7-2 Receiving a Distress Call (DISTRESS!) ..................58 7-3 Distress Acknowledgement (DISTRESS ACK) or Relay (DISTRESS REL) ......58 Appendix A - Technical Specifications ............59 LOWRANCE LVR-880US & LVR-880EU ......................59 Appendix B - Troubleshooting ................61 Appendix C - VHF Marine Channel Charts ............63 C-1 International Channel Chart ......................

  • Page 7: General Information

    Section 2 - General Information 1-1 Featurtes Congratulations on your purchase of a Lowrance LVR-880US or LVR-880EU marine band VHF radio. Both models provide you with the following useful features: • Prominent channel display • Adjustable contrast settings for the LCD •...

  • Page 8: Lcd Symbols And Meanings

    Shows which of the 3 favorite channels, if any, are selected. Other- wise blank. Hi Lo Transmission power. High (Hi) 25 W or Low (Lo) 1 W. USA Int Can Selected channel bank for VHF radio operations and regulations. Weather channel. LVR-880US only. Lowrance - LVR-880 Operation Instructions...
  • Page 9 (40°30.5223N) and longitude (120°23.1231E) and UTC time in 12 hour format (12:15pm). • the name of the destination waypoint (FISHY), its bearing (138°), your distance in nautical miles, mile, or kilometers (depending on your choice of units), and any cross track error (XTE) are shown. Lowrance - LVR-880 Operation Instructions...

  • Page 10: Beep Tones & Call Alerts

    Press ENT (the center of the Channel Select knob) to confirm your choice or setting. If you make an error, press – until < is displayed, then push the center of the Channel Select knob to backup. Lowrance - LVR-880 Operation Instructions...

  • Page 11: The Radio Keys

    The Radio Keys All possible keys and their functions are listed here. Note that some of the keys may not avail- able, depending on your Lowrance VHF radio model. 2-1 VOL - Volume and Power Turn clockwise to power on. After displaying the startup LCD briefly, the radio goes to opera- tional mode in CH16, Hi power transmission, and shows your current position and time if GPS data is available.

  • Page 12: Push To Select (Ent)

    If you are in FM RADIO mode, you can press ENT to enter SCAN mode. The SCAN symbol appears on the LCD. Turn the Channel Select knob left or right to move to the next strong channel. After the channel is selected, press ENT again to exit SCAN mode. Lowrance - LVR-880 Operation Instructions...

  • Page 13: Ic (Hailer Mode)

    LISTEN mode. To change the volume, turn the Channel Select knob OR press + or – when the fog horn is sounding. Note: you cannot change the volume of the HORN or SIREN. Lowrance - LVR-880 Operation Instructions...

  • Page 14: Nav (Show Waypoint)

    FOR MOB FOR MOB B 010 RELEASE TO RELEASE TO RELEASE TO D 0.01 SAVE SAVE SAVE X 0.00 The bearing and distance to the Man Overboard position, and any cross track error (XTE), are Lowrance - LVR-880 Operation Instructions...

  • Page 15: Mob (Temporary Waypoint)

    To add a favorite channel for the first time, select that channel then hold 3CH to store it in the CH1 location. The CH1 symbol will appear on the LCD to confrm the channel has been stored. Repeat the procedure to store two more favorite channels in the CH2 and CH3 locations respectively. Lowrance - LVR-880 Operation Instructions...

  • Page 16: Scan (All Scan & 3Ch Scan)

    OFF/ON. With scanning OFF and the X channel selected, press ENT to cancel the skipped channel. Note: It is not possible to skip over the priority channel. Press SCAN to stop at the current channel. 3CH SCAN mode Lowrance - LVR-880 Operation Instructions...

  • Page 17: Scan (Dual Watch Mode)

    Note: If SAME is activated and the 6 digit County IDs you want to monitor are entered, the radio will sound the weather alarm when it detects a weather alert or weather hazard alert on the selected weather channel. Lowrance - LVR-880 Operation Instructions...

  • Page 18: Call Menu

    Some channels allow only low power transmissions initially but can be changed to high power by holding down H/L and PTT at the same time. See Appendix C for a complete listing of channel charts. Lowrance - LVR-880 Operation Instructions...

  • Page 19: Radio Menu Select Options

    Section 5-6 LL REPLY Section 5-7 GPS SIM Section 3-7 RESET Section 3-8 See sections 1-5 and 1-6 if you want to know how to move around the MENU and enter, save and change alphanumeric data. Lowrance - LVR-880 Operation Instructions...

  • Page 20: Manage Your Waypoints List (Waypoint)

    Enter a waypoint name (maximum 6 characters), then the latitude, then the longitude. Press ENT when all the information is correct then select YES. The new waypoint is saved and your waypoint list is displayed again. Lowrance - LVR-880 Operation Instructions...

  • Page 21: Edit Or Delete A Waypoint

    Your waypoint list is displayed. Press ENT. NEW WP starts to flash. Scroll down to the waypoint you want to go to. The selected waypoint flashes. Press ENT again. Select GO. The waypoint is set immediately as the destination waypoint. Lowrance - LVR-880 Operation Instructions...

  • Page 22: Go To Nearest Waypoint (Nearest Wp)

    Tip: Hold down MOB and release before the 3 second countdown completes. Your current LL position is stored in TEMP1 to TEMP3 in the waypoint list. If the list is full, a message appears asking if the oldest location can be overwritten: TEMP WP FULL DELETE TEMP1? Lowrance - LVR-880 Operation Instructions...

  • Page 23: Send Waypoint Data To A Chartplotter

    When you are finished, press ENT (repeatedly if necessary) until a new LCD appears. Press ENT to store the changes. The waypoint list is displayed again. If more changes are required, repeat steps 2 through 6. Otherwise, press EXIT. Lowrance - LVR-880 Operation Instructions...

  • Page 24: Set The Backlighting Level (Backlight)

    ENTER NAME ENTER NAME WAYPOINT MANUAL NEW STARFISH BACKLIGHT SEA ROSE ENTER MMSI ENTER MMSI BUDDY LIST MERMAID IV ENTER NAME STARFISH2 BUDDY LIST STARFISH 123456789 MANUAL NEW ENTER MMSI STORE STARFISH 123456789 CANCEL SEA ROSE Lowrance - LVR-880 Operation Instructions...

  • Page 25: Edit Or Delete An Entry

    (DIST). LOCAL is not recommended for use in open sea conditions. It is designed for use in areas of high radio noise; for example, close to cities. See also SQL (Squelch Control) in section 2.2. Lowrance - LVR-880 Operation Instructions...

  • Page 26: Set Distance Sensitivity

    If the boat has an operational GPS navigation receiver, the VHF radio automatically detects and updates the vessel position and the local time. However, if the GPS navigation receiver is disconnected or absent, you can specify the vessel Lowrance - LVR-880 Operation Instructions...

  • Page 27: Manually Enter Position And Utc Time (Manual)

    UTC and local time and display your local time on the LCD. MENU SELECT GPS/DATA SETTING TIME OFFSET LOCAL/DIST MANUAL TIME OFFSET +00.00 CONTRAST SETTING TIME FORMAT GPS/DATA TIME DISPLY 04:43 UTC TIME OFFSET 07:50AM LOC +03.00 17 36.233 N 161 05.651 E 07:43 LOC Lowrance - LVR-880 Operation Instructions...

  • Page 28: Time Format Options (Time Format)

    06:56PM LOC Select GPS/DATA then SETTING. Select TIME FORMAT. Select 12 or 24 hr as desired. In this example, 12 hour format has been selected and so the LCD shows the AM or PM suffix. Lowrance - LVR-880 Operation Instructions...

  • Page 29: Time Display Options (Time Disply)

    GPS/DATA LL DISPLY Select GPS/DATA then SETTING. Select LL DISPLY. Select ON (on) or OFF (off ) as desired. In this example, OFF has been selected and the LCD no longer shows the vessel position. Lowrance - LVR-880 Operation Instructions...

  • Page 30: Course & Speed Display Options (Cog/Sog)

    Note: The default setting is ON for the VHF 880EU and OFF for the VHF 880US. MENU SELECT GPS/DATA SETTING GPS ALERT LOCAL/DIST MANUAL LL DISPLY CONTRAST SETTING COG/SOG GPS/DATA GPS ALERT Select GPS/DATA then SETTING. Select GPS ALERT. Select ON (on) or OFF (off ) as desired. Lowrance - LVR-880 Operation Instructions...

  • Page 31: Gps Simulator (Gps Sim)

    MENU SELECT RADIO RESET DSC SETUP ARE YOU SURE GPS SIM RESET Select RESET. The radio asks for confirmation. Select YES then press ENT to confirm and reset the radio. The menu is displayed again. Lowrance - LVR-880 Operation Instructions...

  • Page 32: Radio Setup Menu (Radio Setup)

    4-1 Channel (UIC) LVR-880US only. Toggle between USA, International, or Canadian channel banks. The selected channel bank is displayed on the LCD along with the last used channel. All the channel charts are shown in Appendix C. Lowrance - LVR-880 Operation Instructions...

  • Page 33: Channel Names (Ch Name)

    Input the new name over the existing name. It can be a maximum of 12 characters. Press ENT (repeatedly is necessary) to display the YES/NO confirmation. Press ENT to confirm the new channel name tag (or the deletion). Lowrance - LVR-880 Operation Instructions...

  • Page 34: Ring Volume (Ring Volume)

    You can switch the radio’s internal speaker ON or OFF. The external speaker is always ON if a speaker is plugged into the external speaker jack. Note: To enable stereo FM speaker amplifiers, the internal speaker must be OFF. Lowrance - LVR-880 Operation Instructions...

  • Page 35: Set The Priority Channel (Watch Mode)

    Each transmitter in the NOAA All Hazards Weather Radio Service (NWR) network is identified with a unique 6-digit SAME code. Each transmitter operates on one of 7 frequencies. Note: To activate a SAME alert, a SAME CODE (county ID) must be selected and turned ON (see section 4-8-2) Lowrance - LVR-880 Operation Instructions...

  • Page 36: Tone Alert

    If SAME ALERT alert is ON and an NWR or EAS alert for your geographic area is broadcast by the NOAA NWR transmitters, the alert is picked up automatically and the alarm sounds. Press any key to cancel the alarm. Lowrance - LVR-880 Operation Instructions...

  • Page 37: Receiving Same Test Messages

    SAME CODE SAME CODE SAME CODE 012011 NEW CODE STORE 0122003 CANCEL Select RADIO SETUP then WX ALERT. Select SAME CODE. If you have already entered any SAME codes, they are listed on the LCD. Lowrance - LVR-880 Operation Instructions...

  • Page 38: Select A Working Same Code

    The COM PORT must be configured correctly before use. The radio can be added to a group of instruments using NMEA protocol. RADIO SETUP NMEA UNITS CHECK SUM INT SPEAKER COM PORT Select RADIO SETUP then COM PORT. Lowrance - LVR-880 Operation Instructions...

  • Page 39: Select The Gps Source (Gps Source)

    Select C H SPACING then select the channel spacing. Select UPPER FREQ then select the upper frequency (between 108.00 and 106.00 MHz). Select LOWER FREQ then select the lower frequency (between 87.50 and 89.50 MHz). Lowrance - LVR-880 Operation Instructions...

  • Page 40: Dsc Setup Menu (Dsc Setup)

    Section 5-6 LL REPLY Section 5-7 GPS SIM Section 3-7 RESET Section 3-8 See sections 1-5 and 1-6 if you want to know how to move around the menu and enter, save and change data. Lowrance - LVR-880 Operation Instructions...

  • Page 41: Enter Or Check Your User Mmsi (User Mmsi)

    It is used on marine transceivers that are capable of using DSC (Digital Select Calling). Contact the appropriate authorities in your country to obtain your user MMSI. If you are unsure who to contact, consult your Lowrance dealer. DSC SETUP INPUT USER...

  • Page 42: Maintain Your Groups

    Select DSC SETUP then GROUP SETUP. The existing group names are displayed. Select the group you want to edit. Press ENT. The group name details are displayed. Select EDIT. Note: To delete the group, select DELETE then YES. The group is deleted immediately and the Lowrance - LVR-880 Operation Instructions...

  • Page 43: Response To Individual Calls (Indiv Reply)

    This is a ONCE-ONLY operation. You must enter your ATIS MMSI before you can access the DSC functions. You can display and read your ATIS MMSI at any time, but you get only one opportunity to enter your ATIS MMSI. Lowrance - LVR-880 Operation Instructions...

  • Page 44: Enable Atis Functionality (Atis Select)

    When ATIS functionality is enabled, the ATIS symbol is shown on the LCD. DSC SETUP ATIS SELECT GROUP SETUP ATIS MMSI ATIS SELECT Select DSC SETUP then ATIS SELECT. Select OFF to disable ATIS functionality or ON to enable ATIS functionality. Press ENT to confirm. Lowrance - LVR-880 Operation Instructions...

  • Page 45: Enable Dsc Functionality (Dsc Select)

    OFF - ignores all incoming buddy LL polling requests. DSC SETUP LL REPLY ATIS SELECT MANUAL DSC SELECT AUTO LL REPLY Select DSC SETUP then LL REPLY. Select your response and press ENT to confirm and return to the menu. Lowrance - LVR-880 Operation Instructions...

  • Page 46: Sending And Receiving Dsc Calls

    The following options are available: DSC CALL INDIVIDUAL Section 6-3 LAST CALL Section 6-6 GROUP Section 6-7 ALL SHIPS Section 6-8 CALL LOG Section 6-9 DIST LOG Section 6-10 LL REQUEST Section 6-12 TRACK BUDDY Section 6-14 Lowrance - LVR-880 Operation Instructions...

  • Page 47: Send An Individual Call To A Buddy (Individual)

    INDIVIDUAL INDIVIDUAL ROUTINE ROUTINE ROUTINE ROUTINE SET CHANNEL SEND? CALLING... WAITING ACK Select DSC CALL then INDIVIDUAL. Select the priority level. Select MANUAL NEW then enter the MMSI of the individual you want to call. Lowrance - LVR-880 Operation Instructions...

  • Page 48: Acknowledgement Of An Individual Incoming Call (Indiv)

    ROUTINE ROUTINE ROUTINE GROUP 10:22AM LOC SET CHANNEL SEND? Select DSC CALL then LAST CALL. The contact details of the most recent incoming call are displayed. Press ENT. Select the working channel and press ENT. Lowrance - LVR-880 Operation Instructions...

  • Page 49: Send A Group Call (Group)

    - To send safety information to all other vessels in range. ROUTINE • - To send a routine call to all other vessels in range Then set the channel and continue as explained in Section 6-4. Lowrance - LVR-880 Operation Instructions...

  • Page 50: Send Using The Call Log (Call Log)

    The Distress Log contains the Distress Log data for the 10 most recent relayed Distress Calls, so that you can call any of them quickly. Always try to make voice contact first on CH16 first, as follows: Lowrance - LVR-880 Operation Instructions...

  • Page 51: Send An Individual Distress Relay Using The Distress Log (Dist Log)

    Press ENT to select INDIV RELAY to show your buddy list. Select the buddy (or enter the MMSI of the vessel) that you want to receive the distress call relay, then set the working channel and continue as explained in Section 6.4. Lowrance - LVR-880 Operation Instructions...

  • Page 52: Send An All Ships Distress Relay Using The Distress Log (Dist Log)

    The working channel is displayed while the radio waits for an acknowledgement from your buddy. If there is no reply after 30 seconds the radio asks if you want to retry. Press ENT if you want to retry. Lowrance - LVR-880 Operation Instructions...

  • Page 53: Track A Buddy (Track Buddy)

    Select SET BUDDY to show the status of each buddy on your tracklist (ON or OFF). Select the buddy whose status you want to change, then select the new status and press ENT to confirm. Lowrance - LVR-880 Operation Instructions...

  • Page 54: Add Or Delete A Buddy On Your Track List (Tracklist)

    Routine or Safety priority (see Section 6-20) In addition to the audible alert, the telephone icon will flash on the screen to remind you that a call is stored in the CALL LOG. Polled position call data is NOT stored. Lowrance - LVR-880 Operation Instructions...

  • Page 55: Receiving An All Ships Call (All Ships)

    The caller should respond to your acknowledgement by making voice contact designated channel. If this does not happen, you can press PTT to initiate voice contact instead. The call data is stored in your Call Log (see Section 6-9). Lowrance - LVR-880 Operation Instructions...

  • Page 56: Receiving A Group Call (Group)

    6.13) you are recommended to make a written note of the position, especially is it is a good fishing position. If enhanced LL position information is available from your buddy, this is shown on the screen until the screen display changes. Lowrance - LVR-880 Operation Instructions...

  • Page 57: Distress Calls

    The radio selects CH16 on Hi power automatically so that you can hear any incoming voice contacts from search and rescue authorities or other boats within range. Press EXIT to cancel the distress call. This is the only key that operates in DISTRESS mode. Lowrance - LVR-880 Operation Instructions...

  • Page 58: Receiving A Distress Call (Distress!)

    • the other screen shows the the MMSI of the boat in distress, the distress category (if specified) and GPS time data. (If the GPS time data is not available, it is filled with 8s.) Lowrance - LVR-880 Operation Instructions...

  • Page 59: Appendix A - Technical Specifications

    0.35uV (distance)/3.5uV (local) - model dependent Spurious Response: ≥70 dB Adjacent Channel Selectivity: ≥70 dB Intermodulation Rejection Ratio: ≥68 dB Residual Noise Level: >40 dB unsquelched Audio power of 60 mm speaker: 94 dBA @ 1 m Lowrance - LVR-880 Operation Instructions...
  • Page 60 Audio Power Out: 22W @ 4 Ohms A-7 COMMS LowranceNet: NMEA2000 Comm. Port: 4800 Baud NMEA0183 NMEA output sentences: DSC ( for DSC call), DSE (for enhanced position). Specifications are subject to change without notice. Lowrance - LVR-880 Operation Instructions...

  • Page 61: Appendix B - Troubleshooting

    Have the antenna checked out. Battery symbol is displayed. The power supply is too low. Check the battery voltage. This should be at least 10.5 V ± 0.5 V DC. Check the alternator on the vessel. Lowrance - LVR-880 Operation Instructions...
  • Page 62 Ensure the supplied FM areal is connected and fully extended in an upright position. The supplied FM areal is to be used in strong FM areas. If the FM stations are weak, recommend using a dedicated marine FM antenna. Connect using the FM antenna adapter supplied. Lowrance - LVR-880 Operation Instructions...

  • Page 63: Appendix C - Vhf Marine Channel Charts

    161.800 Public Correspondence TELEPHONE 157.250 161.850 Public Correspondence TELEPHONE 157.300 161.900 Public Correspondence TELEPHONE 157.350 161.950 Public Correspondence TELEPHONE 157.400 162.000 Public Correspondence TELEPHONE 156.025 160.625 Public Correspondence TELEPHONE Port Operations PORT OPS 156.075 160.675 Lowrance - LVR-880 Operation Instructions...

  • Page 64: Special Notes On International Channel Usage

    Distress, Safety, and Ship Calls. No voice communication is allowed on CH70. This channel is only available on DSC enabled radios. Note: The INTERNATIONAL mode is not legal for use in U.S. or Canada waters. KEY: S = Simplex operating channel; D = Duplex operating channel. Lowrance - LVR-880 Operation Instructions...

  • Page 65: Usa Channel Chart

    U.S. Government, Canadian Coast Guard Yes UNAUTHORIZED 156.175 156.175 Port Operations, VTS in Selected Areas PORT OPS/VTS 156.225 156.225 U.S. Government, Canadian Commercial UNAUTHORIZED Fishing 156.275 156.275 Port Operations PORT OPS 156.325 156.325 Port Operations PORT OPS Lowrance - LVR-880 Operation Instructions...

  • Page 66: Special Notes On Usa Channel Usage

    Channel 70 is designated for use exclusively for Digital Selective Calling (DSC), such as Distress, Safety, and Ship Calls. No voice communication is allowed on CH70. This channel is only available on DSC enabled radios. KEY: S = Simplex operating channel; D = Duplex operating channel. Lowrance - LVR-880 Operation Instructions...

  • Page 67: Canada Channel Chart

    Public Correspondence TELEPHONE 157.350 161.950 Public Correspondence TELEPHONE 157.400 162.000 Public Correspondence TELEPHONE 162.000 Public Correspondence ------ ------ TELEPHONE RX only 156.025 160.625 Public Correspondence TELEPHONE 156.075 156.075 U.S. Government, Canadian Coast Guard Yes UNAUTHORIZED Lowrance - LVR-880 Operation Instructions...

  • Page 68: Special Notes On Canada Channel Usage

    Lightly shaded simplex channels 21A, 23A, 61A, 64A, 81A, 82A, and 83A cannot be lawfully used in Canada waters unless special authorization is obtained from the Canadian Coast Guard. Not for use by the general public. Lowrance - LVR-880 Operation Instructions...

  • Page 69: Weather Channels

    162.525 NOAA Weather Channel NOAA WX RX only WX08 161.650 CANADIAN Weather Channel CANADA WX RX only WX09 161.775 CANADIAN Weather Channel CANADA WX RX only WX10 163.275 NOAA Weather Channel NOAA WX RX only Lowrance - LVR-880 Operation Instructions...

  • Page 70: Eas (Emergency Alert Systems) Alerts

    Fire Warning WARNING Flash Flood Warning WARNING Flash Flood Watch WATCH Flash Flood Statement ADVISORY Flood Warning WARNING Flood Watch WATCH Flood Statement ADVISORY Hazardous Materials Warning WARNING High Wind Warning WARNING High Wind Watch WATCH Lowrance - LVR-880 Operation Instructions...
  • Page 71 WARNING Tropical Storm Watch WATCH Tsunami Warning WARNING Tsunami Watch WATCH Volcano Warning WARNING Winter Storm Warning WARNING Winter Storm Watch WATCH For more information about the Emergency Alert System and event codes, visit: http://www.nws.noaa.gov/os/eas_codes.shtml Lowrance - LVR-880 Operation Instructions...

  • Page 72: Appendix D - Eu Inland Waterway Channels

    156.525 Digital selective calling for distress, safety and calling 156.55 156.55 156.575 156.575 156.6 156.6 a) r) 156.625 156.625 156.65 156.65 f) g) 156.675 156.675 156.7 156.7 156.725 156.725 156.75 156.75 156.775 156.775 156.8 156.8 Lowrance - LVR-880 Operation Instructions...
  • Page 73 86), Ukraine and the Federal Republic of Yugosla via. The Administra tions concerned should make any possible attempt to make these fre quencies channels as soon as possible available for the radiotelephone service on Inland Waterways and/or the required service catego ry. Lowrance - LVR-880 Operation Instructions...
  • Page 74 After permission of the competent authority, this channel may be used only for spe cial events on a temporary basis. In the Czech Republic this channel is used for service category nautical information. In the Czech Republic this channel is used for service category ship-to-port authorities. Lowrance - LVR-880 Operation Instructions...

  • Page 75: Special Channels

    Depending upon your location, you may need a radio station license for the LVR-880. You may also need an individual operator’s license. Lowrance recommends that you check the requirements of your national radio com- munications authorities before operating DSC functions.
  • Page 76 Lowrance Pub. 988-0158-061 Copyright © 2008 Printed in China - 100708 All Rights Reserved Navico 0560 MN000796A-G...

This manual is also suitable for:

Lvr-880 eu

Table of Contents