Checklist - Lowrance LVR-250 Installation And Operation Instructions Manual

Checklist

The following items should be supplied in the box. Check before starting the installation and
contact your dealer if an item is missing.
Note: An antenna is not provided. Consult your Lowrance dealer for advice if necessary.
1. Mounting gimbal for the VHF radio
2. Power supply cable with in built 7 Amp
fuse
3. External speaker connection cable with
white (+) wire and black (-) wire
4. GPS connection cable
5. Two mounting knobs
6. Microphone bulkhead mount
7. Four self-tapping screws for the
mounting gimbal
8. Four flat screws for the mounting
gimbal
9. Four spring washers for the mounting
gimbal
10. Four plain washers for the mounting
gimbal
11. Four nuts for the mounting gimbal
1
2
3
4
Lowrance - LVR-250 Installation and Operation Instructions
12. Two self-tapping screws for the
microphone bulkhead mount
13. Two flat screws for the microphone
bulkhead mount
14. Two spring washers for the
microphone bulkhead mount
15. Two plain washers for the microphone
bulkhead mount
16. Two nuts for the microphone bulkhead
mount
17. Four M5x32 screws for recessed
installation
18. Four nuts for the recessed installation
Not pictured: Two plastic stoppers for the
recessed installation. Installation template.
One 7 Amp spare fuse in case of accidental
reverse of battery polarity. Base unit and
microphone. Protective cover.
5
6
17
18
7
8
9
10
11
12
13
14
15
16
7