Table of Contents
Advertisement
4-5-1 Enter or Edit YOUR ATIS MMSI
DSC SETUP
GROUP SETUP
INDIV REPLY
>ATIS MMSI
ATIS MMSI
923456789
> STORE
CANCEL
1.
Select DSC SETUP, the ATIS MMSI.
2.
If this is the first time that you are entering your ATIS MMSI, a dashed line appears.
Enter your ATIS MMSI along the dashed line. The first number is always 9. Press ENT to
confirm each correct entry and to move to the next digit.
If you make an error, press - until < appears, the press ENT to backup and correct the
entry. If you are editing an existing ATIS MMSI, this will be displayed. Make the required
changes.
3.
Press ENT to store your user MMSI.
4.
Enter your ATIS MMSI again as a password check, then press ENT to permanently store
the ATIS MMSI and return to the menu.
You can view your stored ATIS MMSI at anytime by selecting ATIS MMSI in the main
menu
4-5-2 Enable ATIS Functionality (ATIS FUNC) LVR-250 EU ONLY
ATIS functionality will operate only after the ATIS MMSI has been entered (see previous sec-
tion).
DSC SETUP
INDIV REPLY
ATIS MMSI
>ATIS FUNC
1.
Select DSC SETUP, then ATIS FUNC.
2.
Select ON (on) to enable the ATIS functionality and automatically disable DSC
functionality. The ATIS annunciator appears on the screen.
It is not possible to have both ATIS ON (on) and DSC ON (on) simultaneously. When you
enable one, the other will turn OFF (off ). If DSC and ATIS are both OFF (off ), DSC will
have to be switched ON (on) for normal DSC operation.
There are two annunciators in the screen to show you the current mode: if the DSC annuncia-
tor is shown, DSC is operational, if the ATIS annunciator is shown, ATIS is operational.
INPUT ATIS
MMSI
9----------
An ATIS MMSI always starts with the number 9.
To enter or edit your ATIS MMSI:
ATIS FUNC
>ON
OFF
Lowrance - LVR-250 Installation and Operation Instructions
INPUT ATIS
MMSI
> STORE
CANCEL
INPUT AGAIN
ATIS MMSI
9----------
ATIS
33
Hide quick links:
Advertisement
Table of Contents
