Main Screen - PRITY PLW11 Installation And Operation Manual

The touch screen display has user-friendly visualisation and used for providing
information, setting up of parameters and operation modes.
Its options are divided into two access levels – user and service, and the second one is
protected with a password for access from an authorized service station. Control is
implemented by touching/dragging buttons from the menu of the touch screen display
from the main screen:
"Power" using the buttons

with ❺ being the maximum. If, for instance, you select power 3, the stove control
will modulate between powers 1 and 3.
"Timers"

be set and up to 3 programs can be selected for every day. The time for switching
on/off and the desired temperature are to be pre-set.
"Statistics"

periods.
"Settings"

thermostat, display options, manual charging, selection of language, service
menu, etc.
"Tips"

"Start"

to this end, the button must be held pressed for around 3 sec. until an audible
signal is heard.
"Close"

Navigation buttons

IMPORTANT! Never connect Fumis Premium to an external micro-USB
power supply (e.g. mobile phone chargers)!

5.3.1. Main screen

Description of the display menu:
button you can go to the "Main menu". There you access the following settings:
Using
Air(External thermostat)/Water
is used for the weekly programming. Up to 6 different programs can
the statistics menu provides information about events in past
main menu, allowing settings of time/date, fuel, external
represents a hands-on set of ideas and tips for your stove.
/ "Stop" is used for switching on/off of the heating appliance and
to return to the main screen.
, - selecting sub-menus from the main menu.
23,5
18,0
and you can select the power from ❶ to ❺,
Selection of setting
Pre-set temperature
Current value
45