Table of Contents
Advertisement
2.2
Connection to the mains voltage
MAGIC ACX
must be earthed. The earthing can be carried out via the earthing
screw on the back side of the unit.
MAGIC ACX
may only be used with the included power cable. The power cable
must not be replaced by an inadequately dimensioned power cable.
After plugging the power cable and switching on the device, the unit boots within
30 seconds.
An additional power supply socket for connecting an external 5 V power supply unit
is optional.
2.3
Operational elements at the front side
The system has an illuminated graphical display with a resolution of 160 x 32 pixel
and 19 operating buttons.
On the right next to the display there are two softkeys whose current functions are
indicated on the display. In the middle there are two cursor buttons
(upwards/downwards) as well as an OK button. The numerical pad supports
includes the characters 0...9, '*' and '#'.
2.4
Front status LEDs
The system has five LEDs for status indication at the front side.
•
POWER
Permanent green: when system is ready for operation.
•
SYNC
Signals whether audio stream transmission and reception are ok.
•
ALARM
Signals whether there is a system alarm (hardware) or an application
alarm (software) pending.
•
INPUT 1
Signals whether the Ethernet link status of the Dante module is ok.
•
INPUT 2
Signals whether the Ethernet link status of the Ethernet port used for
audio transmission and reception is ok.
10
Advertisement
Table of Contents
