Racelogic VBOX Micro RLVBMIC01 Instruction Manual page 12

VBOX Micro
Log Settings
To adjust the logging mode and the log rate of the VBOX Micro, click the 'Logging' tab in the VBOX
Micro Setup software.
Once the logging mode and rate has been set click the 'Write Settings' button to program the new
configuration into the VBOX Micro.
The log rate is shown as a frequency (in Hz) and also as a time period (in ms). Both options are
linked so if one is changed the other setting will automatically reflect the change.
Time/Date
The VBOX Micro uses time and date information available from the GPS satellites. This time is
based around UTC (approximately equal to GMT) so if the VBOX Micro is used in a different time
zone the local time should be set inside the VBOX Micro for ease of use.
As the time and date are critical to the creation of file names in the VBOX Micro, it is
recommended that the local time is correctly set.
Adding or subtracting an offset on the Time/Date page of the VBOX Micro Setup software adjusts
the local time.
Once the offset has been set click the 'Write Settings' button to program the new time and date
into the VBOX Micro.
NOTE: In order to obtain UTC time, the VBOX Micro must have attained satellite lock.
Page 12 of 29