Setting The Daylight Level; Aligning The Motion Detector - LIVARNO LUX 288404 Assembly, Operating And Safety Instructions

sure to regulate the sensitivity
of the sensor over the course
of the year.
Setting the
daylight level
Turn the rotary control LUX
to increase the daylight level:
In the position, the motion
detector only reacts at night
(at approx. 10 lx). In the
position, the motion detector
also responds at daylight levels,
as long as about 20,000 lx
are not exceeded.
Aligning the
motion detector
Note: Perform this adjustment at
twilight.
Slacken the locking screw
Turn the rotary control LUX
to position
Align the motion detector
into the central region of the
desired coverage area.
12 GB/IE/NI
12
.
8
12
.
9
Move about through the cover-
age area until you are satisfied
with the response characteris-
tics of the motion detector
To find the proper orientation,
change the position of the rotary
control SENS
10
tion of the motion detector
Note: Please note that the
motion detector
detects movements transverse
to the motion detector
you move directly towards the
motion detector
detect this movement.
When you have aligned the
motion detector
rily, re-tighten the fastening
screws to fix the adjustment.
8
Turn the rotary control LUX
to the desired position. These
can be determined during the
dawn or twilight hours during
which the spotlight
respond.
Slowly turn the rotary control
LUX clockwise until it reacts
12
to movement within the cover-
age area.
.
9
or the orienta-
.
9
primarily
9
. If
9
, it cannot
9
satisfacto-
9
12
should
1