Kia Seltos Manual page 69

Driving your vehicle
Applying Auto Hold function
1. Press the brake pedal and start
the vehicle.
2. Press the Auto Hold button. The
white AUTO HOLD indicator will
come on indicating the system is
in standby.
OSP2059006R
Before the Auto Hold will engage,
the driver's door and engine bon -
net must be closed and the tail -
gate must be closed.
OSP2051007R
When coming to a complete stop by
pressing the brake pedal, the AUTO
HOLD indicator changes from white
to green indicating the AUTO HOLD
is engaged. The vehicle will remain
at a standstill even if you release
the brake pedal.
If EPB is applied, Auto Hold will be
released.
If you press the accelerator pedal
with the shift lever in D (Drive) or
Manual mode, the Auto Hold will be
released automatically and the vehi -
cle will start to move. The indicator
changes from green to white indi -
cating the Auto Hold is in standby
and the EPB is released.
When driving off from Auto Hold by
pressing the accelerator pedal,
always check the surrounding area
near your vehicle.
Slowly press the accelerator pedal
for a smooth launch.
Cancelling Auto Hold function
OSP2059008R
To cancel the Auto Hold operation,
press the Auto Hold switch. The
AUTO HOLD indicator will go out.
To cancel the Auto Hold operation
when the vehicle is at a standstill,
Brake system
6
6 63