Kia Seltos Manual page 144

Hide thumbs Also See for Seltos:
Table of Contents

Advertisement

Driving your vehicle
Warning message
Blind-Spot Collision Warning (BCW)
system disabled. Radar blocked
OSP2059113E
This warning message may appear
when:
One or both of the sensors on the
rear bumper is blocked by dirt or
snow or a foreign object.
Driving in rural areas where the
sensor does not detect another
vehicle for an extended period of
time.
When there is inclement weather
such as heavy snow or rain.
If any of these conditions occur, the
function will turn off automatically.
When Blind-Spot Collision-Avoidance
Assist cancelled warning message is
displayed in the cluster, check to
make sure that the rear bumper is
free from any dirt or snow in the
areas where the radar sensors are
located. Remove any dirt, snow, or
foreign material that could interfere
with the radar sensors.
6
138
Blind-Spot Collision-Avoidance Assist (BCA)
After any dirt or debris is removed,
the function should operate nor -
mally after about 10 minutes of
driving the vehicle.
If the function still does not operate
normally have your vehicle
inspected by an authorised Kia
dealer/service partner.
NOTICE
Turn off Blind-Spot Collision-Avoid -
ance Assist, Blind-Spot Collision-
Avoidance Assist and Rear Cross-
Traffic Collision Warning when a
trailer or carrier is installed.
Deactivate the Blind-Spot Colli -
sion-Avoidance Assist and Blind-
Spot Collision-Avoidance Assist by
selecting ''User settings → Driver
assistance → Blind-spot safety →
Off''
Deactivate Rear Cross-Traffic
Collision-Avoidance Assist by
deselecting 'User settings →
Driver assistance → Parking
safety → Rear cross-traffic
safety'.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents