Kia Seltos Manual page 202

Driving your vehicle
This warning message may appear
when:
One or both of the sensors on the
rear bumper is blocked by dirt or
snow or a foreign object.
A trailer or carrier is installed.
Driving in rural areas where the
sensor does not detect another
vehicle for an extended period of
time.
When there is inclement weather
such as heavy snow or rain.
If any of these conditions occur, the
function will turn off automatically.
When Blind-Spot Collision Warning
cancelled warning message is dis -
played in the cluster, check to make
sure that the rear bumper is free
from any dirt or snow in the areas
where the sensor is located.
Remove any dirt, snow, or foreign
material that could interfere with
the radar sensors.
After any dirt or debris is removed,
the function should operate nor -
mally after about 10 minutes of
driving the vehicle.
If the function still does not operate
normally have your vehicle
inspected by an authorised Kia
dealer/service partner.
6 196
Rear Cross-Traffic Collision-Avoidance Assist
NOTICE
Turn off Blind-Spot Collision-Avoid -
ance Assist and Rear Cross-Traffic
Collision-Avoidance Assist when a
trailer or carrier is installed.
Deactivate Blind-Spot Collision
Warning and Blind-Spot Collision-
Avoidance Assist by selecting
''User settings → Driver assis -
tance → Blind-spot safety → Off''
in the cluster or infotainment
system.
Deactivate Rear Cross-Traffic
Collision-Avoidance Assist by
deselecting ''User settings →
Driver assistance → Parking
safety → Rear cross-traffic
safety'' in the cluster or infotain -
ment system.
Check Blind-Spot Collision Warning
(BCW) system
OSP2059175E
If there is a problem with Blind-Spot
Collision Warning, a warning mes -
sage will appear. The function will
(RCCA)