Kia Seltos Manual page 352

Maintenance
3. Remove the rear combination
light assembly from the body of
the vehicle.
4. Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
5. Remove the bulb from the socket
by pressing it in and rotating it
counterclockwise until the tabs on
the bulb align with the slots in the
socket.
6. Pull the bulb out of the socket.
7. Insert a new bulb by inserting it
into the socket and rotating it
until it locks into place.
8. Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly.
9. Push the socket into the assem -
bly and turn the socket clockwise.
10.Reinstall the light assembly to
the body of the vehicle.
Replacing stop lamp / tail and stop
lamp (LED type) (rear combination
lamp type B)
If the stop lamp (1) or tail and stop
lamp (2) does not operate, we rec -
ommend that the system be
checked by a professional workshop.
Kia recommends to visit an autho -
rised Kia dealer/service partner.
8 86
OSP2079045
The LED lamps cannot be replaced
as a single component because it is
an integrated unit. The LED lamps
have to be replaced with the unit.
A skilled technician should check or
repair the LED lamps, for it may
damage related parts of the vehicle.
Replacing High Mounted Stop Lamp
bulb (LED type)
If the High Mounted Stop Lamp bulb
LED (1) does not operate, we rec -
ommend that the system be
checked by a professional workshop.
Kia recommends to visit an autho -
rised Kia dealer/service partner.
OSP2071081L
Light bulbs