Vestil HLD Series Manual

Table of Contents
HLD-SERIES HYDRAULIC DRUM DUMPERS
Receiving Instructions
After delivery, remove the packaging from the product. Inspect the product closely to determine
whether it sustained damage during transport. If damage is discovered, record a complete description of
it on the bill of lading. If the product is undamaged, discard the packaging.
NOTE: The end-user is solely responsible for confirming that product design, use, and maintenance comply
with laws, regulations, codes, and mandatory standards applied where the product is used.
Technical Service & Replacement Parts
For answers to questions not addressed in these instructions and to order replacement parts, labels,
and accessories, call our Technical Service and Parts Department at (260) 665-7586. The Department can
also be contacted online at https://www.vestil.com/page-parts-request.php.
Electronic Copies of Instruction Manuals
Additional copies of this instruction manual may be downloaded from
manuals.php.
Table of Contents
Specifications............................................
Signal Words.............................................
Safety Instructions......................................
Installing the Drum Dumper........................
Record of Satisfactory Condition...............
Operating the Drum Dumper......................
Inspections...............................................
Power Unit Operation.................................
Sequence of Operation.............................
Operation Issues and Solutions....................
Removing Air from the System...................
Troubleshooting Guide...............................
Limited Warranty.......................................
Table of Contents
2/4/2022
Vestil Manufacturing Corp.
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Web: www.vestilmfg.com
Page Table of Figures
2 Fig. 1: Installation
3 Fig. 2A: HLD Side
3 Fig. 2B: Drum-Engaging Clamp
4 Fig. 3A: Handheld Controller
4 Fig. 3B: Handheld
5 Fig. 4: Limit Switch Effect on Dumping
6 Fig. 5: 115VAC Electrical Circuit
7 Fig. 6: 208-230VAC Electrical Circuit
7 Fig. 7: 230/460VAC Electrical Circuit
7 - 8 Fig. 8: Hydraulic Circuit
8 Figs. 9-12: Exploded Views & Bills of
9 Fig. 13: Labeling
19
Copyright 2010 Vestil Manufacturing Corp.
Fax: (260) 665-1339
e-mail:
https://www.vestil.com/page-
Diagram..............................
View....................................
Assembly..........
Functions.............
Controller............................
Diagram..........
Diagram......................
Diagram................................
HLD MANUAL
info@vestil.com
Page
4
5
5
5
5
Angle..... 6
10
Diagram.... 11
Diagram.... 12
13
Materials..... 14 - 17
18
Page 1 of 19