Advertisement
At the end of the Autoprogram procedure on the
display is visualized a summary of devices found on
the line.
NEW = new found
TYPE ID
device
The CONF command allow the rescue of the devices surveied during the self programming according to the
following formality:
-
NEW and INC are initialized with the default data
-
MAN are removed
The
-
devices rightly programmed remain with the current programming
The data regarding the initialized devices can be afterwards modified using the programming points procedure.
Page 20
NOTIFIER ITALIA
INC = points that have been previously
programmed but incoherent with the survey
done during the Autoprogram procedure
(NEW + INC + devices rightly programmed )
Programming manual
Doc. M-145.2-AM1000-ENG Rev A.1
When the system finds more devices with the
same address it is displayed the message as per
the nearby plate showing the address.
The user wil be able to identify the devices with
the same address through the lighting of the
relative leds.
Screen of the auto-programming executin
MAN = devices previously
programmed but not surveied during
the Autoprogram
TOT = total of the devices surveied on the line
AM-1000
AM1000_manu
Advertisement
