HYBRID MIXING CONSOLE
EFX Return
EFX Return
Two stereo return inputs are available for the connection of stereo devices, such as reverb processors, which do
not need extensive processing, or access to the full range of auxiliaries.
AUXILIARY RETURN
L/MONO
R
RET 2
16
IMX-416/424/432
1. AUX SENDS
Return channels can be sent to Aux 5 and 6. Send signal is
always post-fader. One useful application of this is sending
reverb to In Ear Monitors.
2. BUS ROUTING
Connects the RETURN signal to MIX bus and MONO bus.
1
3. RETURN FADER
A 60mm stereo fader gives you smooth, high resolution
control over the RETURN level controls.
4. AFL
Connects the channel signal to AFL bus.
2
3
4
R
L/MONO
RET 1
5
5. L / R Input
A pair of 1/4" TRS jack sockets allow balanced input.
Nominal input level is 0dBu, and approximately
input impedance is about 10kΩ.