Sub-Group - Inter-m IMX-416 Operation Manual

HYBRID MIXING CONSOLE

Sub-Group

Sub-Group
GROUP 4
OUTPUT
6. SUB-GROUP OUTPUTS AND INSERTS
The Sub-Group's outputs and insert points are placed as a couple.
1/4" TRS socket for inserting external devices. The send is pre-fader. The tip is wired to a ground
compensated send, unbalanced return is via the ring and sleeve. Nominal I/O level is 0dBu.
The "OUTPUT" TRS socket is impedance-balanced sob-group signal output.
12
IMX-416/424/432
1
2
3
4
5
GROUP 3
INSERT OUTPUT INSERT
1. PAN
Controls the signal's position in the stereo image
when you rout signal to "MIX" bus.
2. MUTE SWITCH
Cuts post fader signal.
3. SUB-GROUP FADER
A professional 100mm fader gives you smooth,
high resolution control over the sub-group level.
4. BUS ROUTING
Groups can be routed to the main "MIX" outputs
and "MONO" output.
The "MONO" signal is not affected by PAN
control.
5. AFL
Connects the sub-group's Post-Fader signal to
mono AFL bus. You can monitor the signal on
your phones and the AFL BAR METER.
GROUP 2
OUTPUT INSERT OUTPUT
6
GROUP 1
INSERT