Setting Up A Washing Machine Connected To Someone Else's Account; Remote Control Function And Using It - Beko B3D59644UG User Manual

6.20.2 Setting up a Washing Ma-
chine Connected to
Someone Else's Account
If the washing machine that you want to use
has been previously registered to the system
with someone else's account, you need to
establish a new connection between your
HomeWhiz App and the appliance.
a. Download HomeWhiz Application on the
new smart device you want to use.
b. Create a new account and log in to this
account on the HomeWhiz app.
c. Follow the steps described in HomeWhiz
Setup (HomeWhiz Setup) and proceed
with the setup procedure.
Since the HomeWhiz Feature and
Remote Control function on your ap-
pliance is operated via pairing using
Bluetooth technology only one
Homewhiz application can operate it
at a time.
6.20.3 Remote Control Function
and Using It
After HomeWhiz setup, bluetooth will auto-
matically turn on. To activate or deactivate
the Bluetooth connection, please see
"Bluetooth 3".
If you turn off and on your machine while
bluetooth is active, it will automatically re-
connect. In cases such as paired device go-
ing off the range, bluetooth will automatically
turn off. For this reason, you will need to turn
on the bluetooth again if you want to use the
Remote Control function.
You can check the bluetooth symbol on the
display to track your connection status. If the
symbol is continuously on, you have
bluetooth connection. If the symbol is flash-
ing, the product is trying to connect. If the
symbol is off, you have no connection.
WARNING
If the Bluetooth connection is turned
on in your product, then the Remote
Control function can be selected.
If the Remote Control function can-
not be selected, check the connec-
tion status. If the connection cannot
be established, repeat the initial
setup steps over the product.
For safety reasons, the product door
will be locked and remain locked re-
gardless of the operating mode of
the product when the Remote Con-
trol function is activated. If you want
to open the door of the product, you
will need to turn the programme se-
lection knob or press the remote
control key to deactivate the remote
control function.
When you want to control your washing ma-
chine remotely, after the front lid is closed,
you need to activate the Remote Control
function by pressing the Remote Control
button while the programme knob is in the
Download Programme/Remote Control posi-
tion button on the control panel of your
washing machine. Once access is estab-
lished to the product, you will see a screen
similar to the one below.
When the Remote Control is enabled, you
can only manage the machine, turn it off and
follow the status through your washing ma-
chine. And all functions except child lock can
be managed through the application.
You can follow whether the Remote Control
function is On or Off through the function in-
dicator on the button.
If the Remote Control function is Off, all the
operations are handled on the washing ma-
chine and only status follow-up is allowed on
the application.
EN / 42