Setting Up A Washing Machine Connected To Someone Else's Account; Remote Control Function And Using It - Beko B5DF T 59447 W User Manual

6.20.2 Setting up a Washing Ma-
chine Connected to
Someone Else's Account
If the washing machine that you want to
use has been previously registered to the
system with someone else's account, you
need to establish a new connection
between your HomeWhiz App and the ap-
pliance.
a. Download HomeWhiz Application on the
new smart device you want to use.
b. Create a new account and log in to this
account on the HomeWhiz app.
c. Follow the steps described in Home-
Whiz Setup (HomeWhiz Setup) and pro-
ceed with the setup procedure.
Since the HomeWhiz Feature and
Remote Control function on your
appliance is operated via pairing
using Bluetooth technology only
one Homewhiz application can op-
erate it at a time.
6.20.3 Remote Control Function
and Using It
After HomeWhiz setup, bluetooth will auto-
matically turn on. To activate or deactivate
the Bluetooth connection, please see
"Bluetooth 3".
If you turn off and on your machine while
bluetooth is active, it will automatically re-
connect. In cases such as paired device
going off the range, bluetooth will automat-
ically turn off. For this reason, you will need
to turn on the bluetooth again if you want to
use the Remote Control function.
You can check the bluetooth symbol on the
display to track your connection status. If
the symbol is continuously on, you have
bluetooth connection. If the symbol is flash-
ing, the product is trying to connect. If the
symbol is off, you have no connection.
WARNING
If the Bluetooth connection is
turned on in your product, then the
Remote Control function can be se-
lected.
If the Remote Control function can-
not be selected, check the connec-
tion status. If the connection cannot
be established, repeat the initial
setup steps over the product.
For safety reasons, the product
door will be locked and remain
locked regardless of the operating
mode of the product when the Re-
mote Control function is activated.
If you want to open the door of the
product, you will need to turn the
programme selection knob or press
the remote control key to deactivate
the remote control function.
When you want to control your washing
machine remotely, after the front lid is
closed, you need to activate the Remote
Control function by pressing the Remote
Control button while the programme knob is
in the Download Programme/Remote Con-
trol position button on the control panel of
your washing machine. Once access is es-
tablished to the product, you will see a
screen similar to the one below.
When the Remote Control is enabled, you
can only manage the machine, turn it off
and follow the status through your washing
machine. And all functions except child lock
can be managed through the application.
You can follow whether the Remote Control
function is On or Off through the function
indicator on the button.
If the Remote Control function is Off, all the
operations are handled on the washing ma-
chine and only status follow-up is allowed
on the application.
In the event that Remote Start function can-
not be turned on, appliance will make a
warning sound when you press the button.
EN / 41