Drying Steps; End Time - Beko B3D59644UG User Manual

• Bluetooth
You can use the bluetooth connection func-
tion to pair your machine with your smart
device. This way, you can use your smart
device to get information about your ma-
chine and control it.
To activate bluetooth connection:
Press and hold Remote Control function but-
ton for 3 seconds. Countdown "3-2-1" will
be displayed, and then Bluetooth icon will
appear on the display. Release Remote Con-
trol function button. The bluetooth icon will
flash while the product is pairing with smart
device. If connection is successful, icon will
remain on.
To deactivate bluetooth connection:
Press and hold Remote Control function but-
ton for 3 seconds. Countdown "3-2-1" will
be displayed, and then Bluetooth icon will
disappears on the display.
First setup of the HomeWhiz applic-
ation must be complete for the
bluetooth connection to be activ-
ated. After setup, pressing the re-
mote control function button while
the knob is at Download Pro-
gramme/Remote Control position
will automatically activate the
bluetooth connection.

6.12 Drying Steps

Iron Dry
Drying is performed until the Iron Dry step is
reached at the drying level.
Cupboard Dry
Drying is performed until the Cupboard Dry
step is reached at the drying level.
Extra Dry
Drying is performed until the Cupboard Extra
Dry step is reached at the drying level.
The dryness level may vary depend-
ing on the laundry mixing and mater-
ial type as well as amount and wet-
ness level.
Clothes containing lace, tulle, stone,
beads, sequins, wires etc. and laun-
dry with high silk content should not
be dried in the machine.
Time Based Drying – minute
To achieve the desired dryness level at a low
temperature, you can choose from drying
durations of 30, 90 and 150 minutes.
When drying a small amount of laundry
(maximum 2 items), the timed drying steps in
Cotton or Synthetic drying programmes
should be selected.
If the laundry is not at the desired dryness
level at the end of the drying programme,
timed drying can be selected to finish the
process.
When this function is selected, the machine
performs drying for the set time regardless of
the drying level.

6.13 End Time

Time display
When the end time function is selected, the
remaining time until the programme starts is
shown in hours such as 1h, 2h, and the re-
maining time to complete the programme
after your programme starts is shown in
hours and minutes as in the 01:30 example.
Programme duration may differ from
the values in section "Programme
and consumption table" depending
on the water pressure, water hard-
ness and temperature, ambient tem-
perature, amount and the type of
laundry, auxiliary functions selected
and the changes at the mains
voltage.
EN / 36