Handling Safety; Installation Safety - Beko B3D59644UG User Manual

disconnects all terminals from
the mains (fuse, switch, main
switch, etc.) shall be available
on the electrical installation.
• Do not touch the plug with wet
hands.
• When unplugging the appli-
ance, don't hold the power
cord, but the plug.
• Make sure the plug is not wet,
dirty or dusty.
1.4

Handling Safety

• Unplug the product before
moving, remove the water out-
let and water main connec-
tions. Drain any water left in-
side the product.
• This product is heavy, do not
handle it by yourself. Do not
hold extruding parts such as
the laundry loading door to lift
and move the product. The
upper tray should be tightly
fixed for moving.
• Your product is heavy; it
should be carried carefully by
two people if a staircase is in-
volved. It may cause injuries if
your product falls on you. Do
not hit and drop the product
while carrying.
• Carry the product in an upright
position.
• Make sure that the hoses as
well as the power cable are
not folded, pinched or crushed
after the product is fitted into
its place after installation or
cleaning procedures.
1.5
• Check the information on the
manual and installation in-
structions to prepare the
product for installation and
make sure the electrical
mains, clean water mains and
water outlet are suitable. If not,
call a qualified electrician and
plumber to have them make
the necessary arrangements.
These operations are the re-
sponsibility of the customer.
• Check for any damage on the
product before installing it. Do
not have the product installed
if it is damaged.
• Injuries may occur if hands are
put into uncovered slots.
Close the holes of the trans-
portation safety bolts with
plastic plugs.
• Do not install or leave the
product at locations where it
may be exposed to external
environment conditions.
EN / 6

Installation Safety