Homewhiz Feature And Remote Control Function; Homewhiz Setup - Beko B3D59644UG User Manual

6.20 HomeWhiz Feature and Remote
Control Function
HomeWhiz allows you to use your smart
device to check your washing machine and
get information about its status. With Home-
Whiz application you can use your smart
device to perform various procedures that
can also be performed on the machine. Plus,
you can use some features only with the
HomeWhiz function.
You must download the HomeWhiz applica-
tion from the app store of your smart device
to use the bluetooth feature of your machine.
Make sure that your smart device is connec-
ted to internet to install the app.
If you are using the app for the first time,
please follow the on-screen instructions to
complete your user account registration.
Once the registration procedure is complete,
you can use all products with the HomeWhiz
feature in your house on this account.
You can touch the "Appliances" tab in the
HomeWhiz application to view appliances
paired with your account. Following the in-
stallation of the application, HomeWhiz func-
tion enables the washing machine to send
you instant notifications via your smart appli-
ance.
In order to use the HomeWhiz func-
tion, the application must be in-
stalled on your smart appliance, and
your washing machine must be
paired with your smart appliance via
Bluetooth. If your washing machine
is not paired with your smart appli-
ance, it will work like an appliance
without HomeWhiz feature.
Your product will work when it is
paired with your smart appliance via
Bluetooth. Controls that have been
made through the application will be
activated with this pairing. Therefore,
the strength of the Bluetooth signal
between the product and the smart
appliance should be sufficient.
Please visit
learn which Android and IOS ver-
sions are supported by HomeWhiz
application.
All safety measures described in the
"GENERAL SAFETY INSTRUC-
TIONS" titled section of the user
manual are also valid for remote op-
eration with HomeWhiz function

6.20.1 HomeWhiz Setup

In order for the application to run, a connec-
tion between your appliance and the Home-
Whiz Application must be established. For
this connection to be established you must
follow the steps below for setup procedure
on both the appliance and the HomeWhiz
Application.
a. If you are adding a device for the first
time, touch "Appliances" tab on the
HomeWhiz Application. Select "ADD AP-
PLIANCE" (touch here for setting up a
new appliance) button in the upper right
corner. Perform the setup by following
both the steps below and the steps in the
HomeWhiz Application.
b. To start the setup, make sure that your
machine is turned off. Press and hold the
Temperature button and the Remote
EN / 40
link to
www.homewhiz.com