Cancelling The Programme; End Of Programme; Standby Mode; Homewhiz Feature And Remote Control Function - Beko B3D510644UW User Manual

The loading door will not open if the
water temperature in the machine
is high or the water level is above
the loading door baseline.

6.17 Cancelling the Programme

The programme is cancelled when pro-
gramme selection knob is turned to a differ-
ent programme or machine is turned off
and on again using the programme selec-
tion knob.
If you turn the programme selection
knob when the Child Lock is en-
abled, the programme will not be
cancelled. You should cancel the
Child Lock first.
If you want to open the loading
door after you have cancelled the
programme but it is not possible to
open the loading door since the wa-
ter level in the machine is above
the loading door baseline, then turn
the Programme Selection knob to
Pump+Spin programme and drain
the water in the machine.

6.18 End of Programme

End symbol appears on the display when
the programme is completed.
If you do not press any button for 10
minutes, the machine will switch to OFF
mode. Display and all indicators are turned
off.
Completed programme steps will be dis-
played if you press any button.

6.19 Standby Mode

Your machine has the "Standby Mode" fea-
ture.
After turning the machine on with the On/
Off button, if no programme is started or no
other action is taken during the selection
phase, or if nothing is performed within ap-
proximately 2 minutes after the selected
programme is over, the machine automatic-
ally switches to energy saving mode. Fur-
thermore, if your product has a display that
shows the programme time, this display is
completely turned off. If you turn the pro-
gramme selection button or touch any but-
ton, the lights are illuminated and the
screen will turn on again. The choices you
make when exiting the energy saving state
may change.
Check your selections' accuracy before
starting the programme. Adjust your set-
tings again if necessary. This is not an er-
ror.
6.20 HomeWhiz Feature and Remote
Control Function
HomeWhiz allows you to use your smart
device to check your washing machine and
get information about its status. With
HomeWhiz application you can use your
smart device to perform various procedures
that can also be performed on the machine.
Plus, you can use some features only with
the HomeWhiz function.
You must download the HomeWhiz applic-
ation from the app store of your smart
device to use the bluetooth feature of your
machine.
Make sure that your smart device is con-
nected to internet to install the app.
If you are using the app for the first time,
please follow the on-screen instructions to
complete your user account registration.
Once the registration procedure is com-
plete, you can use all products with the
HomeWhiz feature in your house on this
account.
You can touch the "Appliances" tab in the
HomeWhiz application to view appliances
paired with your account. Following the in-
stallation of the application, HomeWhiz
function enables the washing machine to
send you instant notifications via your
smart appliance.
EN / 39