Homewhiz Feature And Remote Control Function; Homewhiz Setup - Beko B5DF T 510447 M User Manual

6.20 HomeWhiz Feature and Remote
Control Function
HomeWhiz allows you to use your smart
device to check your washing machine and
get information about its status. With
HomeWhiz application you can use your
smart device to perform various procedures
that can also be performed on the machine.
Plus, you can use some features only with
the HomeWhiz function.
You must download the HomeWhiz applic-
ation from the app store of your smart
device to use the bluetooth feature of your
machine.
Make sure that your smart device is con-
nected to internet to install the app.
If you are using the app for the first time,
please follow the on-screen instructions to
complete your user account registration.
Once the registration procedure is com-
plete, you can use all products with the
HomeWhiz feature in your house on this
account.
You can touch the "Appliances" tab in the
HomeWhiz application to view appliances
paired with your account. Following the in-
stallation of the application, HomeWhiz
function enables the washing machine to
send you instant notifications via your
smart appliance.
In order to use the HomeWhiz func-
tion, the application must be in-
stalled on your smart appliance,
and your washing machine must be
paired with your smart appliance
via Bluetooth. If your washing ma-
chine is not paired with your smart
appliance, it will work like an appli-
ance without HomeWhiz feature.
Your product will work when it is
paired with your smart appliance
via Bluetooth. Controls that have
been made through the application
will be activated with this pairing.
Therefore, the strength of the
Bluetooth signal between the
product and the smart appliance
should be sufficient.
Please visit
to learn which Android and IOS ver-
sions are supported by HomeWhiz
application.
All safety measures described in
the "GENERAL SAFETY IN-
STRUCTIONS" titled section of the
user manual are also valid for re-
mote operation with HomeWhiz
function

6.20.1 HomeWhiz Setup

In order for the application to run, a con-
nection between your appliance and the
HomeWhiz Application must be estab-
lished. For this connection to be estab-
lished you must follow the steps below for
setup procedure on both the appliance and
the HomeWhiz Application.
1. If you are adding a device for the first
time, touch "Appliances" tab on the
HomeWhiz Application. Select "ADD
APPLIANCE" (touch here for setting up
a new appliance) button in the upper
right corner. Perform the setup by fol-
lowing both the steps below and the
steps in the HomeWhiz Application.
2. To start the setup, make sure that your
machine is turned off. Press and hold
the Temperature button and the Remote
EN / 39
link
www.homewhiz.com