Removal Of Electrical Box - Daikin Floor Standing Type F-Series Service Manual

Outdoor Unit - RK(X)S25/35F2V1B
2.2

Removal of Electrical Box

Procedure
Step
1. Remove the electrical
box.
Disconnect the 2
1
connectors for the
reactor.
2 Cut the clamp.
3 Disconnect the
connector for the
compressor [S30].
163
Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Procedure
[S30]
Points
Preparation
Remove the panels and
disconnect the connector for
the fan motor according to
"Removal of Outer Panels /
Fan Motor".
(R7214)
(R7215)
When reassembling, coil the
excessive lead wire and
hang the loop on the hook.
(R7216)
Removal Procedure
SiBE06-708_A