Table of Contents
Advertisement
75023
Information Of Sensor
Model
U403-01
1) Hold the sensor with its opening towards the user's index or ring
Sensor Usager
finger (Fig. 1 ). The sensor should be oriented in such a way that the
sensor side with a finger tip sign is positioned on the top.
2) Insert the user's index or ring finger into the sensor until the
fingernail tip rests against the stop at the end of the sensor. Adjust
the finger to be placed evenly on the middle base of the sensor.
Direct the cable along the top of the user's hand.
3) Inspect the sensor site every 2 hours for skin integrity and relocate
the sensor every 2 hours according to step1-2 .
9 Specifications
Environmental
Temperature (
C)
sDecltl catlons
Relative humidity
°
(non-condensing)
Display
Hardware specifications
Power indicating lamp
Loudspeaker
Notice indicating lamp
Sensor connector
Powersupply connector 1 . used to connectinQ the CharQer stand
Page26
Picture
Reusable Adult
Finger Clip SpO2
Fig ure 1
5 to 40
Operating cond i tions
15% to 95%
Color LCD, 2.4"
1 .liQhlinQ Qreen and yellow
1.Gives audible notice (45 to 85dB) and button tone;
Suooorts Pitch Tone and multi-level volume.
1 . lighting red and yellow
1 . 9-pin type D connector
Copyright. Concord Health Supply. Inc.
Testing
Name
position
Finger
Sensor
-20 to 60
Storage conditions
1 5% to 95%
Intended
crowd
Adult
(�40kg)
Advertisement
Table of Contents
