Table of Contents
Advertisement
75023
4 Battery Installation
The pulse oximeter is designed to operate on three 1. 5V alkaline AA
4.1 Battery Power
batteries. A new set of batteries will provide at least 22 hours of
operation.
The Low Battery indicator displays and flashes on the information area,
4.2 Low Battery Indicator
and a low priority alarm begins to sound when approximately 15 minutes
of operation remains. The batteries should be replaced at this point.
-
= j8PM
months or longer, remove the batteries from the device before
A
Caution:
storage.
Ll.l
1) Turn off power. Pull the battery cover downward, toward the bottom
4.3 Installing the Batteries
of the 75023, and then remove the battery access door.
2) Install three "AA" size batteries, orientated as shown in Figure 1.
3) Replace the battery access door.
WARNING: Dispose of battery in accordance with local
ordinances and regulations.
A
WARNING: Explosion hazard. Do not use the 75023 in the presence
of flammable anesthetics mixed with air, oxygen, or nitrous oxide.
A
Page 12
.-
n
OU
If the 75023 is to be stored for a period of three
Copyright. Concord Health Supply. Inc.
Advertisement
Table of Contents
