Table of Contents
Advertisement
Quick Links
1. INTRODUCTION .............................................................................................................................. 1
1.1. WARRANTY..........................................................................................................................................................................................1
2. COMO SL COMPONENTS ............................................................................................................... 2
3. GENERAL INFORMATION ABOUT YOUR COMO SL .......................................................................... 4
3.1. INTENDED USE ..................................................................................................................................................................................4
3.2. PEDELEC / EPAC ...............................................................................................................................................................................4
4. GENERAL NOTES ABOUT RIDING ................................................................................................... 5
4.1. RIDING TIPS ........................................................................................................................................................................................5
4.2. BEFORE RIDING ................................................................................................................................................................................5
4.3. KNOW YOUR RANGE ........................................................................................................................................................................6
4.4. REMOVABLE YELLOW STICKER.....................................................................................................................................................6
4.5. RIDING WITH KIDS ...........................................................................................................................................................................6
5. GENERAL NOTES ABOUT ASSEMBLY ............................................................................................. 7
5.1. SEATPOST ..........................................................................................................................................................................................7
5.2. SPEED SENSOR ................................................................................................................................................................................8
5.3. COCKPIT ............................................................................................................................................................................................8
6. GENERAL NOTES ABOUT MAINTENANCE ....................................................................................... 10
6.1. REPLACEMENT PARTS AND ACCESSORIES .................................................................................................................................10
7. HANDLEBAR .................................................................................................................................. 11
8. LIGHTING, RACKS, BASKET AND FENDERS ................................................................................... 11
9. REAR WHEEL AND INTERNAL GEAR HUB ...................................................................................... 14
9.1. REMOVING AND REINSTALLING THE REAR WHEEL ....................................................................................................................14
9.2. DRIVETRAIN TENSION / REAR WHEEL ALIGNMENT ..................................................................................................................16
9.3. SEATSTAY COUPLER ........................................................................................................................................................................17
10. DISPLAY INTERFACE (TCU) .......................................................................................................... 18
10.1. TURBO CONNECT UNIT (TCU) ........................................................................................................................................................18
10.2. STARTING THE SYSTEM ON THE TCU ..........................................................................................................................................18
10.3. CHANGING SUPPORT MODES ON THE TCU ...............................................................................................................................19
10.4. CONNECTIVITY OPTIONS ...............................................................................................................................................................19
10.5. ERROR CODES ................................................................................................................................................................................19
10.6. FACTORY RESET .............................................................................................................................................................................20
10.7. CHANGING THE INTERNAL TCU BATTERY ..................................................................................................................................21
11. MISSION CONTROL ....................................................................................................................... 22
11.1. DOWNLOAD AND INSTALL MISSION CONTROL ...........................................................................................................................22
11.2. PAIRING YOUR BICYCLE WITH MISSION CONTROL ...................................................................................................................22
11.3. MISSION CONTROL FUNCTIONS ...................................................................................................................................................22
12. BATTERY AND CHARGER.............................................................................................................. 24
12.1. CHARGING AND USING THE BATTERY ..........................................................................................................................................24
12.2. CHARGING THE BATTERY ..............................................................................................................................................................25
12.3. CHARGE LEVEL DISPLAY ...............................................................................................................................................................26
12.4. CLEANING .........................................................................................................................................................................................26
12.5. STORAGE ..........................................................................................................................................................................................27
12.6. TRANSPORT.....................................................................................................................................................................................27
12.7. DISPOSAL .........................................................................................................................................................................................27
12.8. BATTERY TECHNICAL DATA ...........................................................................................................................................................28
12.9. CHARGER TECHNICAL DATA .........................................................................................................................................................28
13. SPECIFICATIONS .......................................................................................................................... 30
13.1. GENERAL SPECIFICATIONS ............................................................................................................................................................30
13.2. BOLT SIZE / TOOLS / TORQUE SPECIFICATIONS........................................................................................................................30
13.3. RECOMMENDED TIRE PRESSURES .............................................................................................................................................31
14. RANGE EXTENDER ....................................................................................................................... 32
15. REGULATORY STATEMENTS ......................................................................................................... 35
16. EC - DECLARATION OF CONFORMITY ........................................................................................... 36
EPAC according to EN 15194
SPECIALIZED BICYCLE COMPONENTS
15130 Concord Circle, Morgan Hill, CA 95037 (408) 779-6229
0000156717_UM_R1, 09/20
TABLE OF CONTENTS
We may occasionally issue updates and addendums to this document.
Please periodically check www.specialized.com or contact Rider Care to
make sure you have the latest information.
Info: specialized.com / 877-808-8154
Advertisement
Table of Contents
Related Manuals for CONCORD COMO SL 4.0
Summary of Contents for CONCORD COMO SL 4.0
-
Page 1: Table Of Contents
We may occasionally issue updates and addendums to this document. SPECIALIZED BICYCLE COMPONENTS Please periodically check www.specialized.com or contact Rider Care to 15130 Concord Circle, Morgan Hill, CA 95037 (408) 779-6229 make sure you have the latest information. 0000156717_UM_R1, 09/20... -
Page 2: Introduction
1. INTRODUCTION THIS USER MANUAL CONTAINS IMPORTANT INFORMATION. PLEASE READ CAREFULLY AND STORE IN A SAFE PLACE. This manual was drafted in the English language (Original instructions) and may have been translated into other languages as applicable (translation of Original instructions). This user manual is specific to your Specialized Turbo COMO SL bicycle and should be read in addition to the Specialized Bicycle Owner’s Manual (“Owner’s Manual”). -
Page 3: Como Sl Components
2. COMO SL COMPONENTS 2 23 6 45 16 17 TOP TUBE 16. MOTOR 30. TIRE DOWN TUBE 17. MOTOR COVER 31. VALVE SEAT TUBE 32. FRONT HUB 18. INTERNAL RECHARGEABLE BATTERY HEAD TUBE 33. INTERNAL GEAR HUB CHAINSTAY 19. SHIFTER 34. - Page 4 TURBO CONNECT UNIT (TCU) All Turbo COMO SL models are all equipped with the TCU display (Fig. 2.2). The display turns on the motor, and provides access to the support modes options, as well as the battery state of charge and error codes. TURBO CONNECT DISPLAY (TCD) The Turbo Connect Display (TCD) is an optional display (Fig.
-
Page 5: General Information About Your Como Sl
3. GENERAL INFORMATION ABOUT YOUR COMO SL 3.1. INTENDED USE The COMO SL is intended, tested and designed for riding on a paved surfaces, smooth gravel roads, and improved trails with moderate grades where the tires do not lose ground contact. (Condition 2). For more information on intended use and structural weight limits, please refer to the Specialized Owner’s Manual. -
Page 6: General Notes About Riding
4. GENERAL NOTES ABOUT RIDING The COMO SL motor provides pedal assistance only while you are pedaling and the bicycle is in motion. The amount of pedal assistance will be higher or lower depending on the amount of force applied to the pedals. If you stop pedaling, the motor will stop providing any assistance. -
Page 7: Know Your Range
4.3. KNOW YOUR RANGE Know the range of your electric bicycle before you start your ride. You can calculate your range by visiting www. specialized.com, selecting your Turbo Bicycle model, then clicking on the range calculator. In addition to the range calculator, we recommend using the Smart Control feature in the Mission Control App to control your range. -
Page 8: General Notes About Assembly
5. GENERAL NOTES ABOUT ASSEMBLY This user manual is not intended as a comprehensive use, service, repair or maintenance guide. Please see your Authorized Specialized Retailer for all service, repairs or maintenance. Your Authorized Specialized Retailer may also be able to refer you to classes, clinics or books on bicycle use, service, repair, and maintenance. WARNING! Due to the complexity of the COMO SL bicycle, proper assembly requires a high degree of mechanical expertise, skill, training and specialty tools. -
Page 9: Speed Sensor
SEATPOST MINIMUM INSERTION: To prevent damage to the frame and/or seatpost, it is important to have a minimum amount of seatpost insertion in the seat tube. This minimum insertion must meet the following requirements: The seatpost must be inserted into the frame deep enough so the minimum insertion/maximum extension (min/max) mark on the seatpost is not visible (Fig. - Page 10 The steerer tube has a built-in steering limiter to prevent any damage to the internally routed cables (Fig. 5.3). „ This steering limiter will affect your ability to turn sharply. Familiarize yourself with the handling of the bicycle by practicing in an open area without any obstructions.
-
Page 11: General Notes About Maintenance
6. GENERAL NOTES ABOUT MAINTENANCE The COMO SL is a high performance bicycle. All regular maintenance, troubleshooting, repair and parts replacement must be performed by an Authorized Specialized Retailer. For general information regarding maintenance of your bicycle, please refer to the Owner’s Manual. In addition, routinely perform a Mechanical Safety Check before each ride, as described in the Owner’s Manual. -
Page 12: Handlebar
7. HANDLEBAR The COMO SL is equipped with a custom designed handlebar assembly which is setup differently to other handlebars. The handlebar alignment can be adjusted by loosening the bolts located behind a cover on the integrated „ handlebar stem (Fig. 7.1). Make sure there are equal gaps on the left and right side of the bracket when tightening the bolts. - Page 13 RACKS AND BASKET 5 mm The front rack of the COMO SL is mounted to the head tube. „ Mount the front rack (A) with the spacer plate (B) inserted between the rack and the head tube. Apply blue „ Loctite to the threads, then bolt the rack to the head tube.
- Page 14 The COMO SL 5.0 is equipped with a custom front basket which is mounted directly to the front rack with bolts „ and nylock nuts. Torque the bolts to 5 Nm / 44 in-lbf (Fig. 8.3). WARNING: The maximum allowed cargo weight is 20 Kg for the rear rack and 15 Kg for the front rack.
-
Page 15: Rear Wheel And Internal Gear Hub
9. REAR WHEEL AND INTERNAL GEAR HUB The COMO SL is equipped with a Shimano internal gear hub which requires the cable anchor bolt to be removed from the cassette joint before removing the rear wheel. 9.1. REMOVING AND REINSTALLING THE REAR WHEEL Before working, shift the hub to the lowest gear. - Page 16 Rotate the cassette joint clockwise (Fig. 9.5). „ Locate the cable anchor back into the slot (Fig. 9.6). The cable anchor nut must be facing outwards. „ Make sure the cable is correctly routed in the guide track before releasing the cassette joint (Fig. 9.7). „...
-
Page 17: Drivetrain Tension / Rear Wheel Alignment
9.2. DRIVETRAIN TENSION / REAR WHEEL ALIGNMENT Your bicycle is equipped with a Shimano internal gear hub, and is driven by either a belt or a chain. For more information on correct installation, use, and maintenance of the drivetrain, please refer to the individual manufacturers’... -
Page 18: Seatstay Coupler
Double check the belt tension is still accurate and adjust if necessary. „ Once the correct tension and alignment is achieved, tighten the locking bolts to 9 Nm / 80 in-lbf with a 4mm hex key (Fig.9.11). „ Proper belt tension is important. Too little tension can lead to tooth jump or skipping. Too much tension can cause wear and damage. -
Page 19: Display Interface (Tcu)
10. DISPLAY INTERFACE (TCU) 10.1. TURBO CONNECT UNIT (TCU) 10.1 MODE CHANGE BATTERY COMPARTMENT BATTERY LEVEL ERROR CODES POWER ON / OFF BLE PAIRING CODE All Turbo COMO SL models are all equipped with the TCU display (Fig. 10.1). The display turns on the motor, and provides access to the support modes options, as well as the battery state of charge and error codes. -
Page 20: Changing Support Modes On The Tcu
10.3. CHANGING SUPPORT MODES ON THE TCU The COMO SL motor offers five different drive settings. TURBO, SPORT, ECO, OFF and SMART CONTROL. TURBO MODE: Maximum power mode for high „ 10.3 speed sections and climbing. SPORT MODE: Maximum control, with sufficient „... -
Page 21: Factory Reset
12.4 ERROR SOLUTION BATTERY ERROR For Error Codes 1-4 try the following solutions. BATTERY NOT FOUND • Reboot your bicycle. • Check Mission Control App for more information. MOTOR ERROR • If the problem persists contact your Authorized Specialized Retailer. MOTOR NOT FOUND Contact your Authorized Specialized Retailer. -
Page 22: Changing The Internal Tcu Battery
To perform a factory reset (Fig. 10.5). 10.5 Long-press (hold) the Mode button. (1) „ Press and release the Power button (2) (continue pressing the Mode button 1). LEDs will light up (3). „ Continue to long-press the Mode button for 10 seconds (4), until the LEDs turn off (5) and turn back on (6). „... -
Page 23: Mission Control
11. MISSION CONTROL The Specialized Mission Control App enables you to further enhance your ride experience by customizing your COMO SL to your personal needs. Most importantly, it allows you to customize motor characteristics, control range, diagnose the system, record rides and see real-time ride data. - Page 24 1: LET’S RIDE: Record your rides, see a map, live ride data and set Smart Control. With Smart Control activated, the motor and battery output are adjusted based on how far or how long you want to ride. 2: TUNE: Customize motor performance and range based on your needs by individually adjusting Support and Peak Power.
-
Page 25: Battery And Charger
12. BATTERY AND CHARGER The COMO SL battery is fitted inside the down tube and can only be removed by first removing the motor. Any work required on the motor and battery should be carried out by an Authorized Specialized Turbo Retailer. Your bicycle is powered by a Lithium-Ion (Li-Ion) battery. -
Page 26: Charging The Battery
12.2. CHARGING THE BATTERY WARNING! Place the charger and battery if removed from the frame on a stable, level surface unaffected by heat. You should charge the battery in a dry, well ventilated area and make sure the charger is uncovered during the charging process. Ensure that the battery and charger are not exposed to any flammable or dangerous substances. -
Page 27: Charge Level Display
CAUTION: If the red diode flashes during the charging process (3) a charging error has occurred. In that case, remove the charger from the socket, discontinue use of the motor support and contact your Authorized Specialized Retailer. The Battery Management System (BMS) is designed to protect a fully discharged battery from damage for a period of time. -
Page 28: Storage
system is switched off before cleaning, blow out the contamination with low air pressure or use a soft brush to remove dry contamination. If wet, leave the charge port open to dry completely before connecting the charger or the RE. Always close the „... -
Page 29: Battery Technical Data
12.8. BATTERY TECHNICAL DATA SPECIFICATION DESCRIPTION UNIT SBC - B15 SBC - B16 (RE) OPERATING VOLTAGE 46.8 46.8 °C 0 — +45 0 — +45 CHARGING TEMPERATURE °F +32 — +113 +32 — +113 °C -20 — +60 -20 — +60 OPERATING TEMPERATURE °F -4 —... - Page 30 WARNING! Fig. 12.5 is a copy of the battery label which is supplied with your bicycle, familiarize yourself with the information before first use. 12.5 DO NOT TEMPERATURE RANGE DO NOT handle DO NOT DO NOT DO NOT DO NOT DO NOT DO NOT store in Storage...
-
Page 31: Specifications
13. SPECIFICATIONS 13.1. GENERAL SPECIFICATIONS ITEM PART NUMBER SPECIFICATION HEADSET CUSTOM HEADSET ASSEMBLY SEAT COLLAR DIAMETER S184700004 38.6 SEATPOST DIAMETER 34.9 REAR INTERNAL GEAR HUB 9 MM AXLE FRONT HUB 110 MM X 12 MM FRONT THRU-AXLE S200200001 137.5 MM X 12 MM 13.2. -
Page 32: Recommended Tire Pressures
REAR DROPOUT SLIDING EXTENSION MOUNTING BOLTS 4 MM HEX REAR DROPOUT SLIDING EXTENSION ADJUSTMENT BOLTS 3 MM HEX TWISTLOCK DISPLAY MOUNT (TCD) 3 MM HEX FRONT LIGHT MOUNTING BOLT 3 MM HEX FRONT RACK HEADTUBE MOUNT 5 MM HEX TOP CAP 5 MM HEX INTEGRATED HANDLEBAR/STEM T25 TORX... -
Page 33: Range Extender
14. RANGE EXTENDER Your COMO SL is compatible with the RE to further increase range and ride time. The RE is securely held in the recommended bottle cage (Zee Cage II - Right) and the Specialized battery retention band supplied with the RE. The RE connects to the motor through a dedicated power cable that plugs into the charge port. - Page 34 Install the RE in the bottle cage.(Fig. 14.3). „ Secure the RE into the bottle cage using the supplied Specialized battery retainer band (Fig. 14.4). „ 14.5 14.6 14.7 Locate the charge port on the non-drive-side of the frame, near the bottom bracket (Fig 14.5). „...
- Page 35 14.9 INTERNAL BATTERY RANGE EXTENDER 90-100 80-89 70-79 60-69 50-59 INTERNAL 80-100 40-49 40-49 RANGE EXTENDER BATTERY LEVEL BATTERY LEVEL 60-79 30-39 30-39 40-59 20-29 20-29 10-19 10-19 20-39 INTERNAL RANGE EXTENDER 0-19 BATTERY LEVEL BATTERY LEVEL With both the internal battery and the RE fully charged, the TCU shows the charge level as overlaying light bars, the internal battery charge level is displayed with 10 blue light bars and the RE charge level is displayed with 5 green light bars (Fig.
-
Page 36: Regulatory Statements
15. REGULATORY STATEMENTS RoHS: Specialized Bicycle Components, Inc. Certifies that this product and its packaging are in compliance with European Union Directive 2011/65/EU on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronics Equipment, commonly known as RoHS. FCC Statement: This device complies with Part 15 of the FCC Rules. -
Page 37: Ec - Declaration Of Conformity
Morgan Hill, CA 95037, USA Tel: +1 408 779-6229 Hereby confirms for the following products: Product description: EPAC (Electrically Power Assisted Cycle) COMO SL 4.0 Model designation: COMO SL 5.0 The conformity with all applicable Machines (2006/42/EC). directives from the guideline: The machine also conforms to all the Electromagnetic Compatibility (2004/108/EC).