Table of Contents
Advertisement
Copyright. Concord Health Supply. Inc.
75023
WARNING: To ensure user safety, do not place the 75023 in any
A
position that might cause it to fall on the user.
WARNING: As with all medical equipment, carefully route patient cables
A
to reduce the possibility of patient entanglement or strangulation.
WARNING: To ensure accurate performance and prevent device failure,
A
do not expose the 75023 to extreme moisture such as rain.
5 75023 Operation
The parameters of the 75023 are preset to factory default values. See
5.1 Introduction
Table 2.Table 2 lists the parameters, ranges available, and the factory
default values. The parameter may be set on an individual basis by the
user, and will remain in effect until the default parameters are restored.
(See section 5.3.5)
Parameter
%SpO2 Upper Alarm Lower Alarm Limit plus 1 to100%
Limit
%SpO2 Lower Alarm 20% to Upper Alarm Limit minus 1
Limit
Pulse Rate Upper
Alarm Limit
Pulse Rate Lower
Alarm Limit
User type
Alarm Volume
Pulse Beep Volume
Shelf life
1) Press the Power button to turn on the 75023.
5.2 Turn On The 75023
2) The notice lamp flashes, and then goes out.
3) The system gives a beep and displays the startup screen.
4) The startup screen disappears and the pulse oximeter enters the
main screen.
Table 2· Parameter Ranges
Range/selections
Lower Alarm Limit plus 1 to 250 bpm 90 bpm
30 bpm to Upper Alarm Limit minus 1 40bpm
ADU(adult) PED( pediatric) NEO
(neonate)
1 to 10
Oto 10
5 Years
Page 13
Factory defaults
100%
90%
Adult
5
5
Advertisement
Table of Contents
