Table of Contents
Advertisement
Copyright. Concord Health Supply. Inc.
75023
• Inspect if the notice system functions correctly.
• Make sure that the batteries meet the performance requirements.
• Make sure that the pulse oximeter is in good working condition.
In case of any damage or abnormity, do not use the pulse oximeter.
Contact Concord Health Supply personnel immediately.
Dispose of the pulse oximeter in accordance with local environment
7.3 Disposal
and waste disposal laws and regulations. For the disposal of Sp02 sensor,
follow local regulations regarding disposal of user waste.
8 Accessories
• Use only accessories specified in this manual. Using other accessories
WARNING
may cause damage to the pulse oximeter.
• Disposable accessories are designed for single-person use only. Reuse
of them may cause a risk of contamination and affect the measurement
accuracy.
• Check the accessories and their packages for any sign of damage. Do not
use them if any damage is detected.
• The SpO2 sensor mentioned in this chapter meet the bio-compatibility
requirements and complies with ISO 1 0993- 1 , ISO 1 0993-5 and
ISO 1 0993- 1 0 standards.
• Inspect the application site every 2 hours and relocate the sensor for
ringer finger again (more frequently if perfusion is poor).
• Do not immerse or wet the sensor.
• Do not lift the 75023 by the sensor or the extension cable because the
cable could disconnect from the 75023,causing the 75023 to drop on the
user.
Page 25
Advertisement
Table of Contents
