Table of Contents
Advertisement
ATEN Secure KVM User Manual
Note:
1.
Verify that the second video plug is in the same KVM port section as the first video plug (all in
Port 1, all in Port 2, etc.). Each socket is marked with an appropriate icon.
2.
Repeat steps 4, 5 for each computer you are installing.
3.
With a dual-display installation, for easier cabling at your site, you can also connect all the
primary video connectors to video sockets B, and secondary video connectors to video sockets
A. Make sure the console's primary and secondary monitors are connected the same way.
6.
Plug the USB Smart Card / CAC reader to the console CAC port on the front panel. (Optional)
Note:
1.
Only appropriate qualified USB authentication devices (e.g., Smart Card and CAC readers by
default) can be plugged into this port. During KVM operation, non-qualified or non-authorized
USB devices will be filtered and rejected (the CAC LED that has port focus will flash). Please
refer to the LED display for visual indications.
2.
The CDF (Configurable Device Filtration) function can only be operated by authorized
administrators. Please refer to the Administrator Guide and Port Authentication Utility Guide for
details.
3.
An active session on the selected computer is immediately terminated upon removal of the CAC
card.
7.
Plug the cable on the RPS into the console RPS port. (Optional)
Note:
1.
Be sure to connect the RPS before the ATEN Secure KVM Switch is powered-on.
2.
Any connection of RPS after the ATEN Secure KVM Switch is powered-on will not be detected
by the switch.
8.
Plug the female end of the power cord into the ATEN Secure KVM Switch power socket; plug the
male end into an AC power source.
9.
Turn on the ATEN Secure KVM Switch and check that the LEDs light up. The ATEN Secure
KVM Switch will start a self-test.
Note:
The ATEN Secure KVM Switch performs a security self-test at power-on and at each power cycle.
Front panel LEDs will indicate the self-test status and test result. Please refer to the Operation section
and LED Display section for visual identification details.
17
Advertisement
Table of Contents
