ATEN CS1182DP4C User Manual page 23

ATEN Secure KVM User Manual
5 Scroll Lock LED
6 CAC LED
7 Port Name Label Area
security requirements.
Lights green to indicate the Scroll Lock function has been turned on.
Note: The Scroll Lock LED on the keyboard will be disabled due to
security requirements.
The CAC LED is located on the far right of the upper bar (on the panel)
to indicate CAC reader selection status.
CAC LED (Green LED, CAC models only)
Online/Selected – Lights bright green to indicate that the CAC
function is enabled and the computer attached to its corresponding
port has a USB CAC reader cable connection, and has the CAC focus.
None – No lights indicate that the cable is not connected or CAC
has been disabled.
Warning – Flashes to indicate that a non-qualified USB smart card /
CAC reader is connected when the corresponding port has the focus.
Note:
All panel LEDs on the RPS will flash continuously when a chassis
intrusion (except for Pushbutton jam) is detected. See Chassis
Intrusion Detection section for further details.
Port names can be written on labels and placed on these two areas
covered with mylar panels for easier port identification.
12