Kyocera FS-600 User Manual page 97

Print Quality Problems
5-6
Printed Results
The image is smeared.
Faint or blurred printing
Grey background.
Corrective Action
Clean the laser scanner cover glass.
Open the printer's top cover. Clean the laser scanner cover
glass using the wiper cloth. (See Chapter 4.)
Check the Ecoprint setting. (See Chapter 2.)
If the toner indicator is flashing, install a new toner kit. (See
Chapter 4.)
Clean the laser scanner cover glass.
Open the printer's top cover. Clean the laser scanner cover
glass using the wiper cloth. (See Chapter 4.)
Try setting the thin paper mode.
Send the following PRESCRIBE IIe command from the
computer to set the thin paper mode.
!R! FRPO T9, 2; EXIT;>PRN
This may improve the printing quality. (To return to the
original setting, send the command again with "T9, 2;"
changed to "T9, 0;".)
Check the control panel.
If the toner indicator is flashing, install a new toner kit.
(See Chapter 4.)
Check the process unit.
Open the printer's top cover and check that the process unit
is properly installed.
(Continued on next page)