Kyocera FS-600 User Manual page 120

Postcards
Envelopes
Labels
Use postcards weighing 90 to 128 g/m
coated. Any postcards of size 100 mm by 148 mm or larger may be used.
Envelopes made from paper weighing 60 to 79 g/m
It may not be possible to print evenly across the entire envelope's surface depending on its
construction. Envelopes which are particularly thick may wrinkle as they come out of the printer.
Test a sample envelope on the printer and check that printing quality is satisfactory before
purchasing.
Envelopes with exposed adhesive cannot be used regardless of their type. Envelopes which use
peel-off strips to cover adhesive also cannot be used as this little strip coming off inside the printer
can result in major damage.
Envelopes which have been specially treated also cannot be used. For example, envelopes with
string attached for sealing , envelopes with open windows, and envelopes with film covered windows
cannot be used with this printer.
Labels cause trouble due to their construction. When selecting labels, look for labels whose adhesive
will not come in contact with the printer and whose base will not peel off easily. Major damage to the
printer may result if adhesive gets on the drum or rollers or if a peeled off label gets stuck inside the
printer.
Note ____________________________________________________________________
Printing quality and possible trouble when printing labels are entirely the responsibility of the user.
2
. Avoid using postcards whose printing surface has been
2 may be printed using this printer.
Appendix B Paper Selection
B-11