Kyocera FS-600 User Manual page 33

Setup and Connections
Set up the printer according to the following steps.
1. Install the printer on the paper feeder. (Option) ........................................................... (See p.1-12)
2. Open the top cover. .................................................................................................... (See p.1-13)
3. Install the toner container. ........................................................................................... (See p.1-14)
4. Close the top cover. .................................................................................................... (See p.1-16)
5. Add paper. .................................................................................................................. (See p.1-16)
6. Open the paper stopper on the face-down tray. .......................................................... (See p.1-19)
7. Open the face-up output tray (when the tray is being used). ...................................... (See p.1-20)
8. Connect the printer to the computer. .......................................................................... (See p.1-21)
9. Attach the power cord. ................................................................................................ (See p.1-23)
10. Test the printer. ........................................................................................................... (See p.1-24)
11. Test the interface with the computer. .......................................................................... (See p.1-25)
12. Install the printer driver. .............................................................................................. (See p.1-26)
Chapter 1 Installing the Page Printer
1- 11