Kyocera FS-600 User Manual page 94

Symptom
Nothing lights on the Check that the power cord is
control panel even properly plugged into the power
when power is turned outlet.
on and the fan makes
no noise.
Check that the power switch is really in the on position.
The printer prints a Check the interface cable.
status page, but data
from the computer is
not being printed
normally.
Check program files and application
software.
If you still cannot correct a printer problem even after checking the above, please contact your
Kyocera dealer.
Check Items
Turn off the printer's power, plug in the
power cord securely, and try turning on the
printer's power again.
Connect both ends of the interface cable
securely. Try replacing the printer cable. For
details on the parallel interface of this printer,
see Appendix C.
Try printing another file or using another
print command. If the problem occurs only
with a specific file or application, check the
printer settings for that application.
Chapter 5 Troubleshooting
Corrective Action
5-3