Function Code 42 Relay 2 Mode; Function Code 43: Do Not Disturb Zone - PACH & COMPANY QUANTUM QC Series Manual

QC SERIES MANUAL

Function Code 42 Relay 2 Mode

Relay 2 can be set to four different mode: 1= door control, 2= trigger simultaneously as relay 1, 3= alarm mode (see
function code 24), 4= turn relay 2 on/off remotely (DTMF key7/6)
1. Log-in to programming
2. Enter 42 then #
3. Enter
1= door control, 2=trigger simultaneously as relay 1, 3= alarm mode (see
remotely (DTMF key 7/6), then press #
Function Code 43 Do Not Disturb Time Zone
If you do not want to be disturbed from someone calling you from the system during certain hours of the days, you can
create Do Not Disturb Time Zone. For example: 22:00-06:00 Monday-Sunday. Up to 10 Do Not Disturb Time Zones ca be
programmed.
1. Log-in to programming
2. Enter 43 then #
3. Enter 0-9 then press #
4. Enter 0= delete, 1= add then press #
5. Enter start time (military time) the press #
6. Enter end time then press # (military time, end time must be later than start time, if start time: 22:00 hour and end
time: 06:00, two time zone must be created (22:00 hour - 24:00 hour, 00:01 hour 06:00 hour)
7. Enter
file:///C|/PACH-CO.COM-2022-B/online_manual/qc_series_manual.htm[4/27/2022 8:58:09 AM]
function code 24), 4= turn relay 2 on/off