System Power-On - Huawei LUNA2000-5KW-NHC0 User Manual

LUNA2000-(5-30)-NHS0
User Manual

6.2 System Power-On

● Power on the LUNA2000 within 24 hours after unpacking. The power-off time
● After turning on the battery switch, power on the inverter. For details about
Turn on the DC switch on the battery. After the battery is installed and powered
on for the first time, the ring LED blinks for three circles. Observe the battery
indicator to check the running status.
LED Indicators
Table 6-2 LED indicators
Category
Running indicator
Issue 06 (2022-03-01)
NO TICE
cannot exceed 24 hours during maintenance.
how to power on the inverter, see the quick guide for the corresponding
inverter model.
NO TE
If no PV module is configured, press the black start button first.
Status (Blinking at Long
Intervals: On for 1s and then
Off for 1s; Blinking at Short
Intervals: On for 0.2s and
then Off for 0.2s)
Steady Steady green
green
Blinking Blinking green
green slowly slowly
Off Off
Blinking red N/A
fast
N/A Blinking red
fast
Steady red N/A
N/A Steady red
Steady red Steady red
Copyright © Huawei Technologies Co., Ltd.
6 System Commissioning
Description
N/A
Operating mode
Standby mode
Hibernation mode
Power control module environment alarm
Battery expansion module environment
alarm
The power control module is faulty.
The battery expansion module is faulty.
Faulty
63