Huawei LUNA2000-5KW-NHC0 User Manual page 87

Table of Contents

LUNA2000-(5-30)-NHS0

User Manual

Step 5 Hold down the black start button for 5s to activate the battery. The power control

module LED blinks three times and then the green indicator is steady on. The

battery comprehensive LED blinks three times and then the green indicator is

steady on. The ring LED blinks three circles.

Step 6 Log in to the FusionSolar app. Choose Maintenance > Battery maintenance >

Recharge, start battery recharge, and monitor the charge status of the lithium

battery in real time until the recharge is complete.

Step 7 Confirm that the recharge is complete if five indicators of the ring LED are on and

the comprehensive LED of the battery expansion modules is steady green.

Step 8 After the battery is charged, switch off the inverter input AC circuit breaker and

then the battery input circuit breaker. If other batteries need to be charged, repeat

the preceding steps.

----End

Issue 06 (2022-03-01)

7 System Maintenance

Table of Contents

Luna2000-5-nhe0