Advertisement
Removing the Left Housing
Step 1: Preperation
Tools:
Phillips screwdriver
Flat-tip screw driver
Allen keys SW3, SW4
Open-end wrench SW13 (2x)
Spreader pliers
Step 3: Removing Footshell on Left Side
4.
Remove protective caps from screw head and nut.
5.
Open hexagon head screw M8x32 and nut M8 with
two wrenches (SW13).
6.
Remove the foot rest with pedal rod from the leg
trainer shaft and place it on its side together with
the screw, nut and washers.
Step 2: Removing the Transport Handles
1. Carefully remove the cover plug at the end of the
transport handle using a flat-tip screwdriver.
2.
Unscrew positioning screw M4x12 cylinder head
screw with allen key SW3.
3.
Unscrew the M4x12 Allen head screw (2 pieces)
with the Allen key SW3 on the underside of the
transport handle and then remove the transport
handle.
Step 4: Removing Handles from Left Side
7. Open the eccentric lever on the left pedal bar.
8. Open locking ring Ø10 with spreader pliers and
remove handle with pedal bar.
9.
Remove the black spacer from the shaft.
Seite 11
Advertisement
