Table of Contents
Advertisement
Ver.1.0 Mar. 2004
3.4
E-mail does not reach the destination when transmission
through Scan to E-Mail/Scan to Internet FAX is completed.
Check
Yes
An error message
1
is returned from
the mail server.
No
3.5
Data cannot be received in Internet FAX.
Check
The mail portion is in a
format not good for recep-
tion.
The error report
1
<Out of Support
The format of the file
File> is printed.
attached to the mail is not
supported for reception.
IP address of the POP3
server is wrong.
Port number is wrong.
2
is displayed on the
control panel of the
Failed to log on to the
machine.
POP3 server due to a
wrong user account.
Y103290-2
Possible Cause
The destination mail
Enter the correct mail
address is wrong.
address.
The Internet FAX
machine on the receiv-
ing end is being unable
to receive, or is not
receiving, mail stored in
the POP3 server.
Possible Cause
The reason why the
sender attaches a file of a
format not supported is
probably because the
sender uses PC mail soft-
ware to send the mail and
does not pay attention to
the format of the file when
attaching it.
→ Ask the sender to
attach the file of the cor-
rect format.
Check with the network
administrator and enter
the correct IP address.
Check with the network
administrator and enter
the correct port number.
Check with the network
administrator and enter
the correct user name
and password.
Service Manual
Troubleshooting procedures
Action
Remark
See "Settings and
Operations for Scan
Functions Scan to E-
mail Error Message
and Internet Fax Error
Message"
Action
Remark
Support format
MIME
4-5
Advertisement
Table of Contents
