Chapter 2 Safety - THORLABS Redstone OSA305 Quick Start Manual

Redstone™ OSA305

Chapter 2 Safety

All statements regarding safety of operation and technical data in this instruction
manual will only apply when the unit is operated correctly.
High voltage inside. To avoid electrical shock, prior to powering on the unit,
make sure that the protective conductor of the 3-conductor power cord is
correctly connected to the protective earth contact of the socket outlet.
Improper grounding can cause electric shock, resulting in severe injury or even
This unit must not be operated in explosive environments. If purging gas other
than dry air is used, make sure that the environment for the operator is well
ventilated since the gas will leak out from the instrument. This product is for
indoor use only. To prevent potential fire or shock hazard, do not expose the
unit to any source of excessive moisture. Only use the instrument standing on
The Redstone OSA305 includes a red laser and an infrared laser. The
classification of these lasers follows the European Standard IEC 60825-1:2014.
Viewing the laser output with telescopic optical instruments (for example,
telescopes and binoculars) close to the aperture may pose an eye hazard! Using
the instrument in combination with collimating optics may have an impact on
the assigned laser classification. The safety of any system incorporating the
equipment is the responsibility of the assembler of the system.
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
Page 2
SHOCK WARNING
death. Do not operate without the cover installed.
CAUTION
its feet.
WARNING
Chapter 2: Safety
STN053070-D03