Testing For Usb Connection - Kodak i55 User Manual

Testing for a USB
connection
84
When the Kodak device drivers for the Kodak i55 and i65 Scanners are
installed, a copy of the USB test software will also be installed. It will be
located in this folder by default along with the Kodak Scan Validation
Tool software:
C:\program files\Kodak\Document Imaging\usbtst.exe
If you run this executable (usbtst.exe), it will display a set of USB values
and protocols. At this time, the software application will function in all
operating systems, but will only be valid with the Windows XP system.
If a shortcut of the executable is created, and the /test switch is added
to the end of the "Target:" path (to the right of the quotes), then when it
is launched from the shortcut, it will run the dialog boxes as listed above
and function accordingly with all the operating systems.
To verify USB port speed with the scanner, run the Scan Validation Tool
software, and select the Info tab. USBSCAN/x.x will be displayed in
parentheses in the Driver: box. x.x is the speed the scanner is actually
communicating.
A-61527 May 2006