Kodak i55 User Manual page 32

28
The Scan Validation Tool screen will be displayed. Be sure Save
Images To Files is checked and click one of the four icons to
display the images in the Scan Validation Tool window
6. Lift the balance wire and place some sample documents face-down
into the input tray of the scanner.
7. Click the Start button on the Scan Validation Tool.
The documents will be scanned and displayed in the Scan
Validation Tool window.
NOTE: If the scanner is in lamp saver mode, a message will be
displayed that the lamps need sufficient time to warm up.
After the images have been displayed, your scanner installation
verification is completed.
8. Click the Close box to exit the Scan Validation Tool.
Balance
wire
A-61527 May 2006